858 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.858

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 858 0858 ENG Lab2u

T-Rex extension bases for increasing the NC vice height Suitable for: Size 125- T-Rex No. 361202/Centro Gripp No. 361180. Size 125XL - No. 360400 / 0465 / 0500 / 0510,361302/1304 125M. Size 125K - Titan 2 No. 361302 125K. Supplied with: Size 125XL- Extension base with 1 locating pin, 2 tenons, 8 duo table clamps, and 4 bolts. Size 125; 125K - Extension base with 1 locating pin, 2 T-nuts, and 4 bolts. 0 T. _125XL for type 361230 L B c 0.02 e f k H7 nH7 u X y suitable for colour code Extension base mm (988.02) 280 126 100 100 96 30 20 13 126.2 200 636.57 250 154 85 100 96 30 20 13 125.5 200 125XL 1026.63 400 126 100 30 20 - Screw-in gripper inserts Gripper inserts Suitablefor: NChigh pressure vices No. 361180,361202,361302,361304. Application: Serrated gripp insert, e.g. to clamp blanks. Smooth clamping insert with coating, e.g. for clamping pre-machined components. Serrated gripp insert, round, for drilling near to edges and for additional clearance under the workpiece. 361242 - For highly tempered materials and flame-cut blanks. a 361238 Gripp insert with spikes, height 3 - 4.5 mm 32.67 a 361240 Gripp insert with 2 spikes, height 4.5 - 6 mm 30.69 a 361241 Gripper insert with 4 spikes height 4.5 - 6 mm 41.58 a 361242 Gripper insert carbide height 4.2 - 5.7 mm 50.49 a 361245 Clamping insert with coating smooth 38.61 a 361250 Gripp insert round 32.67 suitable for colour code Dimensions -55 mm see 361210/361222 Universal set Gripp Suitable for: Duo Plus No. 360605, Centro Gripp No. 361180,T-Rex No. 361202 and Titan 2 No. 361302 /1304. Application: The universal grip set offers a variety of possibilities for clam- ping blanks. It consists of a base unit with position adaptation, mounting unit and grip insert, and is bolted to the carrier jaw with an M10 bolt. The customer can modify the mounting unit to set the points of the grip unit in nearly any position relative to the workpiece, allowing the grip height and also the mounting height of the workpiece to be varied. for type 125 Universal set Gripp (case with 4 units) 410.85 Vee grip insert Suitablefor: Universal set Gripp No. 361345, Duo Plus,T-Rex 125, Titan 2 and Centro Gripp. Application: Replaces the grip in the universal set. The special form of the eye grip reduces the deformation of the workpiece arising from the transfer of the clamping forces. This is particularly advantageous for clamping components on which fits are to be machined. SI t-MjPP '1I41W. 7 ¥ S3 iL t 361238 361240 S4 361241 Round gripper insert 361245 361242 t 361250 65 mm min. capacity 300 mm max. capacity 361345 40 mm 29 mm for type HH 125 \ \ 1 a 361350 H 55.44 min. 0=20 mm suitable for colour code max. 0= 120 mm Colour code: Titan 2 T-Rex CentroGripp TC TC-Garant LC LC-Garant Titan Duo Plus 858