852 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.852

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 852 0852 ENG Lab2u

Hoffmann Group 47 Note: Overall length L remains unchanged (reduced risk of collisions). Accessories see No. 360530/360570 and Na 361400 - 361970. Always clamp 2 workpieces Clamping using crank. High clamping forces achieved with low physical effort. Required damping force pre-selectable. Clamping positions I and II induction hardened. Clickquick-damping system (see Na 361950/1960/1970). Precision tenon slot (milled). NC high-pressure vice - Duo 2-component vice Particularly rigid body made of spheroidal graphite iron, ground on top and bottom faces. Pairing accuracy 0.02 mm. Function: Insert first piece at clamping position I and turn the crank until movable jaw touches the component, then insert second part at clamping position II and continue to turn the crank all the way to the stop. Application: For horizontal use. Clamping of 2 identical parts, dimensional differences (± 3 mm). Supplied with: 4 stepped jaws, 1 crank handle, 4 steplessly adjustable clamps, hexagon L-wrench. All steppedjaws reversible. Type 1 90 I NC high pressure vice EfclaMafafl Duo 3160.08 Clamping force up to maximum kN 28 Weight kg 20 L mm 482 a mm 400 b mm 0-64 c 0.02 mm 80 d mm 56-120 h, mm 34 mm 8 Tenon slots mm 20H7 Colour code for suitable accessories Outlet opening for chips and coolant. Spindle chamber with profile wiper and spindle seal. Well-proven maintenance-free high pressure spindle with constant pressure level due to low-wear mechanical power intensifier. No reduction in clamping force. Thread for angled gear drive Na 36 0570, size 90 D. NC high-pressure vice - Duo Plus 2-component vice Rigid base body made of GGG60, slides induction hardened and ground. Function: Place and secure the first and second component to the mobile jaws. If the crank is turned past the engagement point, the clutch disengages. The pressure spindle activates the mechanical power intensifier. Application: For horizontal use. Capable of clamping 2 different workpieces or clamping 2 identical parts. Dimensional differences ± 2.5 mm (workpiece 1 to workpiece 2). Conventional and gripper clamping using carrier jaws or a combination of the two. Supplied with: 4 steplessly adjustable clamps, 3 hexagon L-wrenches, 1 socket 14 AF. Optional extras: Clamping jaws No. 360610,360615,361400 - 361440,361600,361660. Parallel inserts No. 361950,361960,361970. Gripper set No. 361345,361350. Torque wrench No. 656050 size 120. Epj - Precise Type 125 NC high pressure vice Duo Plus 2890.80 Clamping force up to maximum kN 40 Torque N m 40 Weight kg 40 L mm 633 a mm 530 B mm 126 c mm 100 F mm 443 g mm 24 1 mm 20 m mm 255.2 n mm 20 0 mm 0-15 s mm 43.2 Colour code for suitable accessories Colour code: Duo Duo Plus 852