840 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.840

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 840 0840 ENG Lab2u

Hoffmann Group 47 Beam length mm 300 1 600 -360110 EBEi 930.60 1373.13 L mm 300 600 B mm 120 H mm 60 -360112 Jaw width mm 120 s 360114 Pull-down jaw 487.08 Clamping force kN 10; 20; 30 Torque N-m 17; 30; 50 max. stroke mm 4 Jaw width mm 120 -360115 Parallel clamping jaw 729.63 Clamping force kN 10; 20; 30; 40 Torque N'm 10; 20; 30; 40 max. stroke mm 4 Suitable for: Base jaw No. 360119 size P, front jaws/top jaws No. 360122-0129. Jaw width mm 120 -360116 Fixed jaw 392.04 Suitable for: Application: Clamping pot No. 360040 size 10012 and 10148. Zero-point clamping system with variable pitches. Jaw width 360117 Suitable for: Clamping pot socket Base jaw No. 360119. 455.40 360118 Height Version Suitable for: Application: Note: Torque and clamping force are standard values and are only indicative reference points (material-dependent). Cross connector 413.82 Accessories Suitable for: Clamping rail No. 360110. Application: Variable pitches can be achieved using crossed clamping rails. Gripper insert 34.35 27.32 27.32 mm 5.5 1.8 3.8 Smooth Gripp Gripp No. 360119 size P - No. 360116 size 120. No. 360119 size F - No. 360115 size 120. Conventional clamping or clamping with gripper inserts. 36 0119 _P >Earant Multi-point clamping rail 120 mm - accessories All functional faces precision ground, pairing accuracy 0.03 mm. Base rail and jaws case ha rdened. Compact modular design, high clamping force up to 40 kN, maximum tightening torque 50 Nm. Attachment hole pattern for GARANT ZeroClamp zero-point clamping system (reference dimension 200 mm) as standard, can be mounted on clamping plates or matrix tables, or using table clamps. Ruler inset into the top face permits repeatable positioning of the clamp attachments in the serrations of the clamping rail Variable pitches can be achieved using cross connectors. Conventional and Gripp clamping available. Clamping range can be extended individually. Easily clamped using a torque wrench. Application: 5-face machining on multi-axis machining centres. As a cost-effective clamping solution for use with the GARANT ZeroClamp zero-point clamping system or with pallet and automated systems, or directly on to the machine table or clamping towers. Optional extras: Clamping jaw variants, magnetic strip, workpiece backstops see No. 360112 to 360129. Torque wrench No. 656050 size 60. Clamping stud No. 360025 size 18M16. 360110 _GLATT-HM _GRIPP-1.8 _GRIPP-3.8