814 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.814

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 814 0814 ENG Lab2u

Hoffmann Group 47 R Hm Self-tightening drill chuck for hand power drills Automatic tightening whilst drilling, proportional to the cutting force (maintains the clamping force even under tough conditions ). Sturdy design (functional components of metal). With retaining ring. With clamping force protection(damping and locking using only one hand ). Application: For heavy-duty cordless and mains power drills. Cordless impact power drills up to 36 Volt. Reverse torque up to 50 Nm. Note: No through holes - Drill chucks thus have to be secured tightly to the spindle. General purpose - with retaining ring for use on machines with / without spindle stops. Type 341710 Clamping range External 0 Drill head length open mm Drill head length closed mm Capacity Keyless drill chuck Supra-SK13E mm indi i 13-1/2 62.55 1.5-13 42.5 72 79.3 1/2-20 R6Hm Keyless drill chucks Keyless drill chuck with self-tightening locking mechanism. No additional locking required (not even for impact drilling). Very ergonomic, user-friendly, equipped with start-up protection. Good concentricity. Through hole version for right-hand and left-hand operation(thread M5 or M6). Size 13-3/8; 13-1/2- With carbide inserts in clamping jaws. 342200 342205 Type 342200 342205 Clamping ran- External 0 Drill head length open Drill head length closed Capacity maximum machine power Keyless drill chuck with Keyless drill chuck with self-tightening locking mecha- self-tightening locking mechanism, plastic version nism, metal version ge 342200 342205 Extra RV mm inch W W 10-3/8 26.55 1-10 42.7 55 60.9 3/8-24 550 - 10-1/2 26.55 1-10 42.7 55 60.9 1/2-20 1000 - 13-3/8 31.05 1.5-13 42.7 64.5 72.4 3/8-24 1000 - 13-1/2 31.05 34.65 1.5-13 42.7 64.5 72.4 1/2-20 1000 1100 Gear rim drill chuck with key With drill chucktaper DIN 238 For clockwise and anticlockwise rotation. With drill chucktaper DIN 238 for fitting to arbors No. 342300-342850 or directly on to the machine spindle. 342215 - Jaws are hardened. 342220- Key guide not hardened. Application: For universal drilling on portable electric drills, hammer drills and pillar drills. 342215 Drill chuck taper 342220 Type S 342220 Clamping range External 0 Drill head length closed Drill chucktaper largest drill chucktaper 0 suitable gear rim socket nQHm hqleX. Gear rim chuck 342215 342220 342215 342220 342215 342220 Prima mm 23.85 - 0.5-6.5 - 29.5 - 53 - B10 10.094 S1 23.85 - 0.5-6.5 - 29.5 - 575 - B12 12.065 SI 23.85 - 0.5-8 - 29.5 - 57.5 - B12 12.065 S2 26.55 23.36 0.8-10 0.8-10 34.5 33.5 60.5 61.4 B12 12.065 S2 26.55 23.36 1-10 1-10 42.8 42.4 77 77 B16 15.733 52 31.05 27.62 1.5-13 1.5-13 42.8 42.4 77 77 B16 15.733 52 62.55 54.95 3-16 3-16 50 50 86.5 86.5 B16 15.733 S3 62.55 54.95 1-16 3-16 56.5 50 98 98 B18 17.78 S3 814