752 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.752

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 752 0752 ENG Lab2u

Hoffmann Group 47 Spare and additional jaws - self-centring chucks Application: As the jaws can be changed or adjusted to the required diameter in just a few seconds, it is useful to have several jaw sets on hand ready for use at the machine. This minimises set-up times. The jaw units consist for example of several sets of base jaws with soft top jaws, which can be machined out to the required diameters. This rationalisation method is not only necessary for NC machines but also important for every lathe type. Base jaws hardened Suitable for: 313200/3205 - Schunkself-centring chucks No.313115/3117/3135/3137, Rohm self-centring chucks Duro No. 313110 / 3120 / 3130 / 3140 and other self-centring chuck systems. Application: To accept hard or soft top jaws. Fastening screws for top jaws are supplied. 31 3205_200 for chuck type 160 250 315 5 313205 WWI Base jawset, 3-piece, angled serrations 144.00 171.90 198.90 294.30 486.00 S 313207 papMfg Base jaw set, 3-piece, iiiiiliit straight teeth 176.40 185.40 220.50 270.00 287.10 313200 nftiim Base jaw set 3-piece, angled serrations 163.80 171.90 180.90 271.80 429.30 L (313205,313200) mm 74 90 110 125 160 L (313207) mm 65 85 104 115 125 B (31 3205,313200) mm 20 22 26 32 45 B (31 3207) mm 20 22 26 32 32 A (313205,313200) mm 18 20 20 26 30 A (313207) mm 18 20 20 20 26 b (313205,313200) mm 32 40 40 54 60 b (313207) mm 32 40 40 40 54 D (313205,313200) mm 8 10 12 12 18 D (313207) mm 8 10 12 12 12 suitable for colour code Hard top jaws Suitable for: Schunk self-centring chucks No. 313115 / 3117 / 3135 / 3137, Rohm self-centring chucksDuroNo.313110/3120/3130/3140 and other self-centring chuck systems. Application: For fitting to hardened base jaws. Applicable as reversible jaws in conjunction with the base jaws. Note: Hard top and stepped jaws purchased subsequently must be ground internally in the chuck for concentricity and run-out. 313210 for chuck type 160 250 315 suitable for colour code I 313210 Marrianafi ton iaur cot 3 niora 126.90 145.80 162.90 214.20 (335.70) rnmrn ndiUcllcU lUpjdWbcl j-piclc R Hm 136.80 143.10 151.20 226.80 (339.30) L (313210) mm 63 71.7 90 105 130 L (313250) mm 63 72 92 107 130 B (313210) mm 20 22 30 36 45 B (31 3250) mm 20 24 34 36 50 D mm 8 10 12 12 18 b mm 32 40 40 54 60 A mm 18 20 20 26 30 Colour code: Rohm self-centring chucks and jaws Schunk self-centring chucks and jaws 752