741 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.741

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 741 0741 ENG Lab2u

Hoffmann Group 47 Clamping nuts for OZ collet chucks DIN 6388 D G 2.5 25000 min'1 Nut is case-hardened, trowalised, and ground all around. With ball-bearing thrust collar for higher clamping forces and improved radial run-out characteristics. Suitable for: OZ collet chucks, see No. 300695 / 0710 / 0750 / 0770 / 2460 / 2462 / 2880. 309670 Clamping chuck damping range mm 2-16 2-25 I 2 1 gCj Lf.'T/lBlj Ba a it‘ 02 clamping nut 34.75 39.80 46.83 L mm 24 30 33.5 0D mm 43 60 72 Thread M33x1,5 M48x2 M60X2.5 maximum tightening torque N'm 100 180 220 t -1 T £ D M 1 1 , L , Accessories for CENTRO P - ER clamping nut and sealing washer Note: FAHRION system ER clamping nuts type CP and sealing rings type HP do not lit on to other systems Mini = all sizes with „M", extremely slim design. MiniSlim = sizes with „MS", extremely super slim design. Conical = all sizes with „C". Standard = all other sizes. With trapezoidal thread for high clamping forces. Extra long double guidance for exact centring of the ER clamping nut. ER clamping nuts coated for reduction of friction. 30 9655 - ER clamping nut CP, not suitable for HP sealing rings. 30 9665 - ER clamping nut CP, for HP sealing rings. I' Mini-size 11M, 16M and 16MDI. Suitable for: FAHRION ER collet chuck CENTRO P. Optional extras: Sealing rings No. 309666 - 9668. Clamping wrenches No. 309754 - 9756. HP collets No. 309349 - 9359. Note: Only the nominal size can be clamped (no intermediate range ) I 11M 16MS 16C I 16 I 25 I 32 I 40 PJfWWIH ER damping nut CP Standard 36.63 31.68 31.68 31.68 26.73 29.70 31.68 43.56 Clamping range mm 1-5 1-7 1-10 1-10 1-10 2-16 2-20 3-26 L mm 12 16.2 20.9 23.2 23.4 25.6 26.9 31.5 00 mm 10 16 22 24 30 40 50 63 maximum tightening torque N-m 8 10 30 55 55 90 140 200 Type CP for ER 16MSDI 1 16CDI 1 16DI i 25DI 32DI 40DI ER clamping nut CP for HP sealing rings 37.62 37.62 31.68 34.65 36.63 49.50 Clamping range mm 1-10 1-10 1-10 2-16 2-20 3-26 L mm 23.9 26.2 26.4 28.9 30.1 34.8 0D mm 22 24 30 40 50 63 maximum tightening torque N-m 30 55 55 90 140 200 Sealing washers HP - for ER clamping nuts CP Vulcanised sealing rings up to 80 bar. 0.5 mm collet 0 clamping range (+0.4/-0.1). Suitable for: 309666 - ER CP clamping nuts No. 309665 sizes 16MSDI, 16CDI, 16DI. 309667 - ER CP clamping nuts No. 309665 size 25DI. 30 9668 - ER CP clamping nuts No. 309665 size 32DI. Note: Not compatible with other sealing ring systems Sealing rings in 0.5 mm increments on request. Sealing rings for No. 309665 DI40 on request. Clamping 0 (1 mm increments) mm 1 2 3...10 11 ...16 17... 20 0D mm L mm a 30 9666 DI16 13.86 13.86 11.39 12.6 2 a 30 9667 CP sealing ring DI25 - 13.86 11.39 11.39 - 20.2 2 a 30 9668 DI32 - 14.45 11.88 11.88 11.88 26.2 2 nr Tapered - size ISC and 16CDI. Standard - size 16,25,32, and size 16DI, 25DI, 32DI