719 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.719

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 719 0719 ENG Lab2u

Hoffmann Group 47 DIN ISO DIN DIN Form 6357 12164-1 69893 69882-3 A G6.3 8000 HPC Auarant Milling head arbors, vibration damped Plain shank. Taper shank, spigot, and all contact surfaces are ground at the collar. With Balluffchip bore. Larger collar contact face.. Vibration damped version, arbor with vibration-damping core. Advantage: Significantly lower tendency to vibrate Considerable increase in feed rate Supplied with: Cutter lock screw and drive dog. Optional extras: Special toggle spanner No. 309840. Note: Further sizes on request. Spigot 0 d. mm 16 22 27 32 -30 6705 HSK-A 63 A = 200 384.12 384.12 384.12 - a 30 6706 Face mill arbor HSK-A 63 A = 300 476.19 476.19 -30 6708 vibration damped HSK-A100 A = 200 478.17 478.17 478.17 - a 30 6709 HSK-A100 A = 300 608.85 608.85 608.85 608.85 0D mm 38 48 58 78 mm 17 19 21 24 ISO DIN ISO 12164-1 69893 26623-1 Form A G6.3 8000 4aBa ii Reducing adapter for tools with PSC shank -IS012164 (DIN 69893) Ground internally and externally. The internal thread provided for the coolant tube in the PSC toolholder is plugged with the socket-head screw incorporated in the adapter. The clamping screw incorporates a through hole, so the system is suitable for internal coolant feed. With Ballufchip bore. Suitable for: Tool arbor with polygonal shank (PSC) - ISO 26623-1. Application: For adaption from HSK-A 63 to PSC. Optional extras: Coolant pipe No. 309880, plug-in socket No. 309890 Dimension A 0D L, mm 40 54 PSC inner 5 a 30 6975 Reducing adaptor for PSC HSK-A 63 shank 322.74 354.42 90 50 64 306975 ISO 12164-1 DIN 69893 Form A G6.3 12000 min'1 HPC IBSfiky Toolholder for indexable drill -IS012164-1 (DIN 69893-1) Position of the threaded pin for countersinking in the indexable drill offset by 0.4 mm. Tightening the lock screw clamps the indexable drill collar against the front face of the arbor. In addition the contact face 0 is larger than for conventional toolholders. Suitable for: All indexable drills with parallel shank to DIN 6595, Part 1. Application: For mounting all standard indexable drills to DIN 6595, Part 1. Optional extras: Coolant pipe No. 309880, coolant pipe wrench No. 309890 i 307000 for shank 0D, mm 20 25 32 40 S 307000 Arbor for indexable drills HSK-A 63 101.25 101.25 101.25 101.25 "a 307010 HSK-A100 142.65 142.65 142.65 142.65 Dimension A (30 7000) mm 80 90 90 105 Dimension A (307010) mm 90 95 100 110 0D mm 40 45 52 60 T D Di 1_ 719