678 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.678

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 678 0678 ENG Lab2u

Hoffmann Group 47 DIN ISO 2G“ fam /Mum 69871 7388-1 ER+Cp HP+CP FAHr M Precision ER collet chuck CENTRO P (CP) - DIN 69871 External and internal taper ground. High concentricity and repetition accuracy at 3xD, maximum 50 mm. Very high holding forces due to coated clamping nut. Alternative: without seal, with CP clamping nut No. 309655 or with seal, with CP clamping nut for sealing rings No. 309665 in conjunction with HP sealing rings No. 309666 - 9668 (for internal coolant supply or as dirt trapl). With Balluffchip bore. Application: For high precision clamping of tools with plain shanks. Supplied with: Without clamping nut and sealing rings. Optional extras: Pull studs (PS) No. 308600 - 8806, PS pull stud wrenches No. 308820 / 8830, Clamping nuts No. 309655 / 9665, CP pull stud wrenches No. 309754 / 9756, CP sealing washers No. 309666 - 9668. HP collets No. 309368 - 9378. Note: CP chuck clamps only nominal up to shank 0 tolerance hi 0. Form Form AD ADB clon’P1 SPSS- £ ,y- 300688 16C Type CP for ER iCH.’JB W, H H.l ilEl-HH 1 iMMtHI il -300686 SK40 short 103.95 - 103.95 - -300687 SK40 A = 70 107.91 107.91 - 94.05 78.21 94.05 78.21 94.05 78.21 -300688 Precision ER SK40 A = 100 107.91 107.91 103.95 108.90 93.06 108.90 93.06 108.90 93.06 -300689 collet chuck CENTROP SK40 A = 160 154.44 154.44 (136.62) 136.62 - (146.52) - 146.52 - -300691 SK 50 A = 70 - 148.50 - -300692 SK 50 A = 100 - 175.23 - Clamping range mm 1-7 1-10 1-10 1-10 1-10 2-16 2-16 2-20 2-20 Dimension A (30 0686,30 0691) mm 45 - 50 - 0D mm 16 22 24 30 30 40 40 50 50 a Mini - size 11M/ 16M (extremely slim design). 300689_11M 300689 25 Standard - Sizes 16,25, and 32. DIN ISO 69871 7388-1 OZ collet chuck - DIN 69871 External and internal taper ground. Ball-bearing power-damping nut. For higher clamping force and improved radial run-out. 30 0695/0710/0770 - GARANT - With Balluffchip bore. All shanks hard turned (for smooth running ). Clamping nut balanced (G 2.5 / 25,000 rpm). Application: For clamping tools with plain shank in collets to DIN 6388 - Form A and B. Supplied with: Clamping nut Optional extras: Pull studs (PS) No. 308600 - 8806, PS wrench No. 308820 / 8830, OZ collets No. 309540 - 9565, Hook spanner No. 628400. ADB min 300695 Form AD G 6.3 12000 min'1 Clamping range mm 2-16 I 2-25 - 300695 0Z collet chuck JbGarairt FormflDB SK40 A = 70 79.79 85.93 s 30 0700 0Z collet chuck Form AD SK40 A = 70 53.26 60.59 -300710 - 0Z collet chuck Garal,t- Form ADB SK40 A = 100 101.97 108.41 s300740 moujT. Q2 collet chuck SK40 A = 100 67.32 70.49 -30 0760 HOLCjC. F°rmAD SK50 A = 70 (76.43) 76.43 30 0770 j . 0Z collet chuck "Gaiant Form ADB SK50 A = 100 123.26 128.21 0D mm 43 60 Spare clamping nut 309670 2-16 2-25 suitable hook spanner 628400 40 / 42 58 / 62 300700 678