645 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.645

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 645 0645 ENG Lab2u

Hoffmann Group 47 Grooving toolholder with groove depth tm„ = 5xgroove width b Shank/Groove width b mm S 27 3755 S 273756 Grooving toolholder right-hand left-hand 8/1,5 111.38 111.38 10/1,5 111.38 111.38 12/1,5 111.38 111.38 16/1,5 116.82 116.82 20/1,5 122.27 122.27 25/1,5 134.15 134.15 10/2 111.38 111.38 12/2 111.38 111.38 16/2 116.82 116.82 20/2 122.27 122.27 25/2 134.15 134.15 12/2,5 111.38 111.38 16/2,5 116.82 116.82 20/2,5 122.27 122.27 25/2,5 134.15 134.15 12/3 111.38 111.38 16/3 116.82 116.82 20/3 122.27 122.27 25/3 134.15 134.15 32/3 145.53 145.53 16/4 116.82 116.82 20/4 122.27 122.27 25/4 134.15 134.15 32/4 145.53 145.53 20/5 122.27 122.27 25/5 134.15 134.15 32/5 145.53 145.53 20/6 122.27 122.27 25/6 134.15 134.15 32/6 145.53 145.53 mm 7.5 7.5 7.5 7.5 7.5 7.5 10 10 10 10 10 12.5 12.5 12.5 12.5 15 15 15 15 15 20 20 20 20 25 25 25 30 30 30 10 12 16 21.5 26.5 10 12 16 21.5 26.5 12 16 21.5 26.5 12 16 21.5 26.5 26.5 16 21.5 26.5 26.5 21.5 26.5 26.5 21.5 26.5 26.5 mm 20.5 20.5 26 29 29.5 29 26 30 30 33 33 31 31 33 33 30 31 34 34 34 37 40 40 40 43 43 43 49 50 50 mm 125 120 150 100 125 150 120 150 100 125 150 150 100 125 150 150 100 125 150 170 100 125 150 170 125 150 170 125 150 170 Screw 279918 (T15; 3.5 Nm 279902 (T15; 3.5 Nm 279902 (T15; 3.5 Nm 279902 (T15; 3.5 Nm) 279904 (T25; 6 Nm) 279904 (T25; 6 Nm) 279902 (T15; 3.5 Nm) 279902 (T15; 3.5 Nm) 279903 (T25; 6 Nm) 279904 (T25; 6 Nm) 279904 (T25; 6 Nm) 279902 (T15; 3.5 Nm) 279903 (T25; 6 Nm) 279904 (T25; 6 Nm) 279904 (T25; 6 Nm) 279902 (T15; 3.5 Nm) 279903 (T25; 6 Nm) 279904 (T25; 6 Nm) 279904 (T25; 6 Nm) 279904 (T25; 6 Nm) 279903 (T25; 6 Nm) 279906 (T30; 8 Nm) 279906 (T30; 8 Nm) 279906 (T30; 8 Nm) 279906 (T30; 8 Nm) 279906 (T30; 8 Nm) 279906 (T30; 8 Nm) 279906 (T30; 8 Nm) 279906 (T30; 8 Nm) 279906 (T30; 8 Nm) Grooving toolholder with groove depth tmH = 7xgroove width b Note: From 19.5 mm (up to groove width 3 mm) and from 24.5 mm (from groove width 4 mm) the second cutter comes into contact with the workpiece. This can lead to scoring. If necessary, single-ended grooving inserts No. 273656 - 273670 can be used. Shank/Groove width b mm 273758 Grooving toolholder right-hand left-hand 12/1,5 113.85 113.85 16/1,5 119.30 119.30 20/1,5 127.71 127.71 25/1,5 134.15 134.15 12/2 113.85 113.85 16/2 119.30 119.30 20/2 127.71 127.71 25/2 134.15 134.15 16/3 119.30 119.30 20/3 127.71 127.71 25/3 140.09 140.09 32/3 151.97 151.97 20/4 127.71 127.71 25/4 140.09 140.09 32/4 151.97 151.97 La mm 10.5 10.5 10.5 10.5 14 14 14 14 21 21 21 21 28 28 28 12 16 21.5 26.5 12 16 21.5 26.5 16 21.5 26.5 26.5 21.5 26.5 26.5 mm 28.5 30 30 29 31.5 31.5 33.5 33.5 37 36.5 36.5 36.5 48 48 mm 150 100 125 150 150 100 125 150 100 125 150 170 125 150 170 Screw 279902 (T15; 3.5 Nm) 279902 (T15; 3.5 Nm) 279904 (T25; 6 Nm) 279904 (T25; 6 Nm) 279902 (T15; 3.5 Nm) 279903 (T25; 6 Nm) 279904 (T25; 6 Nm) 279904 (T25; 6 Nm) 279903 (T25; 6 Nm) 279904 (T25; 6 Nm) 279904 (T25; 6 Nm) 279904 (T25; 6 Nm) 279906 (T30; 8 Nm) 279906 (T30; 8 Nm) 279906 (T30; 8 Nm) 645