59 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.59

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 59 0059 ENG Lab2u

Hoffmann Group 47 HSS E ±0.05 118” hil A, 4tfiannt' Stub subland drill for through holes, 90° (for countersunk screws) With long drilling step. Application: For through holes for screws to DIN-150 273 and countersinks to DIN 74, sheet 1 form A, medium version. For screws to ISO 2009,2010,7046,7047 (DIN 963,964,965 and 966). Especially suitable for holes with simultaneous countersinking in the profile material. 117160 Through hole with countersink for screw head drilled in one operation. Suitable for/ v, m/min Alu plastics qSDEL, Alu cast > 10 % Si X < 500 N X < 750 N 2C < 900 N X < 1100 N X <1400 N X <55 HRC X < 60 HRC X <65 HRC X <67 HRC X <70 HRC INOX <900 N INOX > 900 N Ti >B5 N GG(G) CuZn 6 i k ISO code N Mr- hn P H K N 117160 70 45 40 30 25 25 80 for screws 117160 Stepped drill HSS-E with long drilling step 90 40.99 43.96 46.53 70.49 88.70 ±0.05 mm 4.3 5.3 6.4 8.4 10.5 h9 mm 8.6 10.4 12.4 16.4 20.4 30 30 30 30 30 mm 55 55 55 70 70 mm 110 110 110 110 110 8.6 10.4 12.4 12.5 12.5 mm/rev 0.03 0.07 0.07 0.1 0.1 HSS DIN 8374 h9 h51 30” \ A XhEarant Subland drill for through holes, 90° (for countersunk screws) Drill and counterbore each with its own chip flutes and guide chamfers. This means it can be reground many times. Application: For through holes for screws to DIN-ISO 273 and countersinks to DIN 74, sheet 1 form A, fine version. For countersunk screws to ISO 2009,2010,7046,7047 (DIN 963,964,965 and 966). 117180 90- Example: -S'S- v M5 countersunk screw and the appropriate subland drill No. 117180_M5. Suitable for/ v, m/min Alu plastics qSSo Alu cast >1016 SI X < 500 N X < 750 N X < 900 N X < 1100 N X <1400 N X <55 HRC X <60 HRC X <65 HRC X <67 HRC X <70 HRC INOX <900 N INOX >900 N Ti > 850 N GG(G) CuZn 6 6 ISO code N Mr- nri P H K N 117180 45 40 30 25 25 80 for screws 117180 Stepped drill HSS 90' 24.26 28.02 35.34 39.50 65.93 100.98 t h9 mm if- h8 mm i mm 3.2 6 9 57 4.3 8 11 75 5.3 10 13 87 6.4 11.5 15 94 8.4 15 19 114 10.5 19 23 135 mm f mm/rev 93 6 0.03 117 8 0.03 133 10 0.07 142 11.5 0.07 169 15 0.1 198 19 0.1 59