212 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.212

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 212 0212 ENG Lab2u

Hoffmann Group 47 DIN 377 holex. Extensions for short taps and hand reamers Hardened and galvanised. Square drive and square socket the same size. Application: For extending short taps (e.g. DIN 351 / 352/ 2181 / 5157), hand reamers, and other tools with square shanks. Note: Extensions for machine taps with shank, e.g. to DIN 371 / 374 / 376, can be found under No. 338400. 0 D 149200 Internal and for metric taps 0D I Overall length Internal and for metric taps 0D Overall length external DIN 352 external DIN 352 mm Extension mm Extension mm 2,1 3.65 M1 - M2,6 6 60 8 6.98 - 17 125 2,4 3.65 - 6 70 9 7.79 M13-M16 19 130 2,7 3.65 M3 7 80 10 8.78 - 21 140 3 3.65 M3.5 7 90 11 10.17 M18 23 150 3/4 3.74 M4 8 95 12 11.16 M20 25 155 3,8 3.92 - 9 100 13 15.39 - 27 165 4,3 4.23 - 10 105 14,5 17.37 M22-M24 29 175 4,9 4.46 M4.5-M8 11 110 16 20.97 M27 30 180 5,5 4.64 M9-M10 12 115 18 23.67 M30 33 200 6,2 5.94 Mil 14 120 20 30.96 M33 36 220 7 6.17 M12 15 125 Holder set for internal and external threads for thread machining on conventional lathes High-quality holder set to take taps and dies for use on convention lathes. For internal threads M3 - Ml 6 and external threads M3 - M14. Supplied with: Workpiece holder set (see table) ind. socket spanner and hexagon-socket key, in a useful plastic case. Without dies. Note: A reducing adapter (see No. 34 3000) can be used to easily change the existing MT3 face mill arbor on the machine to accept MT4 or larger. Further holder sets or individual holders available on request. S. Type 11 . W ll Setof holders 583.90 Shank MT3 for dies M3-M14 for taps M3-M16 Content: 1 each red ucer piece for dies (mm) 20x7; 25x9; 30x11 149650 Solid carbide I'vMvfl Standard bGarant Solid carbide tap drilling out tool Strong plain shank with hexagon for mounting in a drill chuck and self-centring cutting edge. Application: For drilling out broken off taps. Stable clamping is necessary, the hole must be dry and without cutting oil. Note: Wear safety glasses. r, A RANT 149830 Grind oblique break-through points flat. Approach the start several times in order to centre the boring-out tool. o " Drill out with an even feed rate. Evacuate chips frequently. Clean the bore and remove the residue Suitable for/ vc m/min Alu plastics Alu cast >10MSi X < 500 N X < 750 N X <900N X < 1100 N X <1400 N X <55 HRC X < 60 HRC X <65 HRC X <67 HRC X <70 HRC INOX < 900 N INOX >900 N Ti >850N Graphite CRP CRP Uni 6 6 ISO code N P H N 149830 10-28 for taps - 149830 fTj -a- X Solid carbide drilling out tool , a a <67 HRC plain shank with hexagon L f TiAIN mm mm/rev 33.46 10 38 3 0.05 39.90 14 46 4 0.08 48.71 19 50 5 0.1 52.47 23 50 6 0.1 56.63 23 60 7 0.12 73.66 25 100 9 0.15 104.94 35 100 11 0.18 212