183 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.183

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 183 0183 ENG Lab2u

Hoffmann Group 47 G A/V 55- DIN 5156 1 3 HSS HSS 4tfiannt' Blind hole machine tap for stainless and acid-resistant steels 13 7450 - Surface vaporised for reduced edge build-up. 13 7700 - For even better performance. For use with emulsion (fat content minimum 8%). Application: For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connection). 137450 137700 Suitable for/ v( m/min Alu plastics Alu cast > 10% Si X <500N X <750N X < SOON X < 1100 N X <1400 N X <55 HRC X < 60 HRC X <65 HRC X <67 HRC X <70 HRC IN0X <900 N INOX >900N Ti >850N CuZn Graphite GRP CRP 6 i ISO code N rn N P H rn nr 137450 13 15 15 15 6 13 o 137700 16 20 19 19 8 6 16 inch 1“ 137450 m 137700 Threads per inch Thread 0 mm t 1 mm Machine tap TiCN 33.07 53.46 28 9.73 90 7 55 44.15 70.69 19 13.16 100 11 9 60.98 93.06 19 16.66 100 12 9 88.31 151.97 14 20.96 125 16 12 158.90 238.59 14 26.44 140 20 16 247.50 353.43 11 33.25 160 25 20 mm 8.8 11.8 15.25 19 24.5 30.75 G na/v 55° HSS E IVi > 40° £3xD bGaiant Spiral flute machine tap High surface hardness. For use with emulsion (fat content minimum 8%). Application: For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connection). I mm 137800 The thread is tapped almost to the bottom of the hole. Suitable for/ v, m/min Alu plastics Alu cast >10%SI X < 500 N X < 750 N X < 900 N X < 1100 N X <1400 N X <55 HRC X <60 HRC X <65 HRC X <67 HRC X <70 HRC INOX <900 N INOX > 900 N Ti >850N CuZn Uni 6 i ISO code N Mr- hn P H rn 137800 16 20 19 19 9 8 16 inch - 137800 Threads per inch Thread 0 X Machine tap fjj Lt i 1 mm G1/8 56.03 28 9.73 90 7 5.5 8.8 G1/4 74.05 19 13.16 100 11 9 11.8 G3/8 97.81 19 16.66 100 12 9 15.25 G1/2 158.40 14 20.96 125 16 12 19 183