133 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.133

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 133 0133 ENG Lab2u

Hoffmann Group 47 XbGaaaitf Micro-lubrication system, patented Sturdy stainless steel body with 3-chamber pressure system for dispensing the lubricant very accurately. Advantage: Application: Supplied with: Note: Very easy to operate. No problematic, inaccurate manual lubrication. Process reliability and longer tool life. Can be used horizontally and vertically in machining centres. For all thread cutting oils up to 570 mm2/s viscosity (see No. 084210 and 084220). The oil is precisely distributed mechanically and hydraulically on to the tapping hole wall. Because the micro lubrication system efficiently uses only very small quantities of oil, an impairment of the consistency of the emulsion is prevented. It thus saves the significant expense of changing over to emulsion with a high fat content, which is essential for process reliability when tapping. Micro lubrication system, main cylinder type S, and one each nozzle type DL and GL filling injector. For accessories and spare parts see the spare parts list. For other quick-change tapping heads with minimum quantity lubrication system (for machine taps with internal coolant supply) see No. 338055 / 8056 / 8060 plus accessories. Type S -130100 Micro-lubrication system 400.95 Overall length Length of body with nozzle L2 Shank 0 Ds (-0.02 / -0.05 mm) mm 150 100 20 60° HSS DIN 352 DIN 13 4H 6H 1 H <3xD Hand tap sets 130150/0200 - Set of three, consisting of taper, second, and plug tap. 130150-0180- Size M2.3 and M2.6 to old DIN profile. 130150- SizeMI -M1.4toIS01 4H. Flanks relief ground. No. 2-Second tap i-3 i . V.V No. 3-Plug tap Suitable for/ vc m/min Alu plastics qQQo Alu cast >10% Si X <500N X < 750 N X <900N XXX < 1100 N < 1400 N <55 HRC X X < 60 HRC <65 HRC X <67 HRC 3 INOX INOX < 70 HRC <900 N > 900 N Ti > 850 N GG(G) Uni a 6 ISO code nri Mr- nri P H K 130150-130200 o O O O Is 130150 - 130160 a 130170 a 130180 s 130200 I TJ fTi -fl- holejC h n 1 1 Hand tap set Serial hand tap single Hand tap set L Tapertap Second tap Finishing teeth mm 84.55 0.25 25 25 2.1 79.00 - - 0.25 25 25 2.1 73.66 0.3 28 25 2.1 65.54 0.35 32 25 2.1 35.74 12.53 12.53 12.53 - 0.4 32 2.8 2.1 63.76 0.45 32 2.8 2.1 32.47 - - 0.4 32 2.8 2.1 29.90 10.49 10.49 10.49 - 0.45 36 2.8 2.1 29.90 10.49 10.49 10.49 - 0.45 36 2.8 2.1 21.29 7.18 7.18 7.18 11.21 0.5 36 3 5 2.7 24.45 8.51 8.51 8.51 - 0.6 40 4 21.29 7.18 7.18 7.18 11.21 0.7 40 4 5 3.4 58.21 - - 0.75 45 6 4.9 21.68 7.62 7.62 7.62 11.43 0.8 45 6 4.9 22.37 7.92 7.92 7.92 11.79 1 50 6 4.9 57.42 - - 1 50 6 4.9 29.40 10.00 10.00 10.00 15.48 1.25 56 6 4.9 75.44 - 1 - 1.25 56 7 5.5 37.42 12.97 12.97 12.97 19.62 1.5 63 7 5.5 46.53 16.24 16.24 16.24 25.02 1.75 70 9 7 59.20 20.30 20.30 20.30 26.73 2 70 11 9 79.60 27.42 27.42 27.42 41.85 2 70 12 9 94.25 32.87 32.87 - 44.91 2.5 80 14 11 116.33 39.60 39.60 39.60 60.66 2.5 80 16 12 143.55 48.91 48.91 48.91 - 2.5 90 18 14.5 165.33 56.43 56.43 56.43 - 3 100 18 14.5 223.74 76.63 76.63 76.63 - 3 100 20 16 289.08 97.81 97.81 97.81 - 3.5 110 22 18 5 6 6.8 133