800 Каталог MITSUBISHI 2020 Режущий инструмент Фрезы Резцы Сверла Пластины Стр.J178

Каталог MITSUBISHI 2020 Режущий инструмент для станков Стр. J178 0800 Lab2u

SOLID END MILLS DF4XL End mill, Long neck, 4 flute, For graphite RECOMMENDED CUTTING CONDITIONS Side milling Work Material Graphite Copper, Copper alloys Dia. DC (mm) Neck length LU (mm) Revolution (min-1) Feed rate (mm/min) Depth of Cut ap (mm) Cutting Width ae (mm) Revolution (min'1) Feed rate (mm/min) Depth of Cut ap (mm) Cutting Width ae (mm) 1 6 30000 1300 1 0.05 30000 1300 1 0.05 8 25000 1000 1 0.05 25000 1000 1 0.05 10 22000 700 1 0.05 22000 700 1 0.05 1.5 10 25000 1200 1.5 0.075 21000 1000 1.5 0.075 16 18000 800 1.5 0.075 18000 800 1.5 0.075 2 10 22000 1500 2 0.1 16000 1100 2 0.1 16 19000 1100 2 0.1 16000 930 2 0.1 20 16000 800 2 0.1 16000 800 2 0.1 3 16 21000 1900 3 0.15 10600 960 3 0.15 20 18000 1500 3 0.15 10600 890 3 0.15 30 14000 1000 3 0.15 10600 760 3 0.15 4 20 18000 2400 4 0.4 8000 1100 4 0.4 40 13000 1500 4 0.4 8000 920 4 0.4 6 30 14000 3200 6 0.6 5300 1200 6 0.6 8 30 10500 2900 8 0.8 4000 1100 8 0.8 10 30 8700 2600 10 1.0 3200 960 10 1.0 12 30 7200 2200 12 1.2 2650 800 12 1.2 Depth of cut a e 1 'h ap m /> D O O' LlI Q. LU O' 0£ ca ID z I CD 3 o a. UJ Q Note 1) When high machining accuracy is needed, or the workpiece becomes chipped, we recommend lowering the feed rate. Note 2) Use a milling machine dedicated for graphite. Note 3) If the rigidity of the machine or the work materials installation is very low, or chattering and noise are generated, reduce the revolution and feed rate proportionately. O in J178