594 Каталог MITSUBISHI 2020 Режущий инструмент Фрезы Резцы Сверла Пластины Стр.H002

Каталог MITSUBISHI 2020 Режущий инструмент для станков Стр. H002 0594 Lab2u

HSK-T TOOLS Tooling system for turning on multi-task machines HSKTOOLS HSK-T System HSK-T is a new HSK system designed for turning on multi-task machines that are compatible with HSK-A type (ISO standard: ISOI2164-1:2001). The HSK system was developed by a consortium of 17 Japanese manufacturers and registered in ISO standard (ISOI 2164-3:2008) under the name HSK-T type in 2008 and JIS standard (JIS B6064-3) in 2013. High accuracy cutting edge positioning The HSK-T type has a closer tolerance between the spindle key and tool holder keyway than the HSK-A type. This results in higher cutting edge positional accuracies. For milling, the conventional HSK-A type tools can be still used. Compatible with both multi-task machines and machining centres =Ur=j HSK-T Turning tool holder HSK-T spindle Multi-task machines HSK-A Rotating tool holder a HSK-A spindle Machining centre Note Short neck length from the flange with thick body of the HSK-T turning tool as shown in the figure at the left. Because there are machines which cannot be mounted depending on the ATC specifications of the multi-task machine(HSK-Atype), please check beforehand. Also be careful of interference of the magazine with adjacent tools. Neck length HSK-T63 Min.4mm HSK-T100 Min.5mm HSK-T turning tool standard (Example) Improved keyway tolerance Close tolerance Tolerance comparison (Example) (mm) HSK A63 HSK T63 h 0.10 H ' 12.25 Key tolerance 12.35 0.15 Minimum clearance 12.25 0.08 Keyway tolerance 12.58 0.33 Maximum clearance 12.2 12.3 12.385 i Minimum clearance 0.015 12.4 h + 12.5 12.6 0.025 112.41 12 0.035 42 12.46 0.075 Minimum clearance H002