242 Каталог MITSUBISHI 2020 Режущий инструмент Фрезы Резцы Сверла Пластины Стр.B012

Каталог MITSUBISHI 2020 Режущий инструмент для станков Стр. B012 0242 Lab2u

CBN & PCD TURNING INSERTS CBN & PCD TURNING INSERTS NON-COATED CBN Sintered Alloy Machining Cast Iron Machining MB4120/MB710/MB730/MBS140 Application Range Sintered Alloy Machining 300 -o 200 D ' Q. l/> U 100 40 60 80 Hardness of Work Material (HRB) 100 >Cast Iron Machining Depth of Cut ap (mm) Recommended Cutting Conditions Sintered Alloy Machining Work Material Application Grade Cutting Speed vc (m/min) range 100 150 200 General Sintered General Alloy Cutting High Density Sintered Alloy General Cutting Sintered Alloy General Cutting MB4120 new MB4120 n w MB4120 n w Feed Depth of Cut Cutting Mode 250 300 f (mm/rev) ap (mm) 0.2 0.3 Dry, Wet 0.2 0.3 Dry, Wet 0.2 0.3 Dry, Wet ICast Iron Machining Work Material Application Grade Cutting Speed vc (m/min) range 250 500 750 1000 1250 1500 Feed Depth of Cut Cutting Mode Gray Cast Iron JIS FC250, JIS FC300 General Cutting Cutting' MB4120NEW I MB730 MB710 Heavy Cutting M BS140 General Cutting f (mm/rev) ap (mm) 0.4 0.5 Dry, Wet 0.5 1.0 Dry, Wet 0.5 1.0 Dry, Wet 0.5 5 Dry, Wet B012