Synchronised through hole machine tap Garant with internal coolant supply M 60 HSSE PM Sturdy design with spiral point and shank to DIN 1835-B Sp

Synchronised through hole machine tap Garant with internal coolant supply M 60 HSSE PM Sturdy design with spiral point and shank to DIN 1835-B. Special geometry for use on machines with synchronised spindle drives. The tap is controlled by the synchronising spindle of the machine. Special TiAIN-S coating for optimum tool life. Can be used with emulsion (fat content minimum 8%). 13 2070- With internal coolant supply for maximum tool life. Recommendation For TOOLOX materials we recommend deviating from the DIN data (see table) by drilling the tapping hole 0 0.05 to 0.3 mm larger. Note For use on synchronised spindles, the GARANT quick-change tapping chuck No. 338100 - 8118 with minimum length adjustment (MLA) ensures highest process reliability. 132065 m 132070 The spiral point evacuates the swarf in cutting direction. Suitable for/ vc m/min Alu plastics pmu Alu cast >10% Si <500 N <750 N <900 N <1100N <1400 N rooLox 33 HRC roour 44 HRC HAflDOX 500 <1600N INOX <900 N INOX >900 N Ti >850 N GG(G) CuZn Gra G C I Uni max r'-j min Air ISO code N P H K N 13 2065/2070- 37 35 22 12 7 7 6 1 132065 132070 Through hole machine tap for synchronised spindles Internal cooling TiAIN rp rn T if 1 Uot h6 mm 0.50 70 6 4.9 0.70 70 6 4.9 0.80 70 6 4.9 1.00 80 6 4.9 1.25 90 8 6.2 1.50 100 10 8.0 1.75 110 12 9.0 2.00 110 12 9.0 (see recommendation) mm M 3 M 4 M 5 M 6 M 8 M10 M12 M16 2.5 3.3 4.2 5.0 6.8 8.5 10.2 14.0 jfbGaiant" Quick-change tapping chuck for synchronised spindles Outstandingly suitable for use with GARANT synchronous machine taps / fluteless taps No. 338100 - 8118 with Minimum Length Adjustment (MLA). MLA (length compensation tension 1 mm, compression 0.2 mm) compensates for difference in pitch between the machine tap / fluteless tap and synchronised spindle. This allows the tools to run at higher cutting speeds; the concentricity is significantly increased. GARANT quick-change tapping heads No. 338055 - 8060 are recommended for GARANT synchronous machine taps / fluteless taps with internal coolant supply. These tapping heads also offer Minimum Length Adjustment (MLA) and a Minimum Quantity Lubrication system (MQL) - for very high process reliability and long tool life. Quick-change tapping head MLA No. 338100 with quick-change collet No. 338120. Quick-change tapping head MLA with MQL No. 338055 with quick-change collet No. 338065. Synchronous machine taps 131125 131128 (IK) 132950 132955 (IK) 132065 132070 (IK) 132280 132285 (IK) 132740 132745 (IK) Synchronous machine taps M 132555 132560(E) 132565 (IK) i Synchronous machine taps G 137344 137345(E) 137346 (IK) Synchronous fluteless taps M 139210 139215(E) 139230 (IK) 139242 139243 (IK) 139244 (IK) 122 Main catalogue Hoffmann Group 46 Standard ISO DIN 13 IS02X 6HX B m-4-h dIn 1835 B <2.5xD Version