892 Каталог HOFFMANN GROUP 2015 Инструмент режущий слесарный измерительный Стр.892

Каталог HOFFMANN GROUP 2015 Tools Инструменты Ver 46 Стр. 892 0892 ENG Lab2u

1 Mitutoyo Digital height gauge and marking-out system Standard C y> Diginatk Version Direct reading from clear digital display. Battery operation with very low current consumption. Data storage key - The measured result can be stored by pressing a key. All critical parts are hardened. Great stability by two parallel hardened columns with rack teeth on the inner faces (size 1000 has 3 columns). 2 preset values permit reference values to be saved (e.g. granite table and workpiece). Carbide tipped scriber. Sturdy base with hardened and lapped surface. Crank on the back of the display housing for quick adjustment and a hand wheel for fine adjustment. Optional extras Square holder No. 445180 for holding dial indicators and lever indicators, centring gauge No. 445250, protractor No. 453500, holder No. 453520, and data cable No. 497080. Height gauge and marking-out system Supplied with 1 battery No. 081560 size 357, 1 cover, 1 carbide scriber No. 443510 Marking height mm 300 600 1000 3 44 5152 Digital height gauge and marking-out system Reading mm 0.005 Error limit mm 0.02 0.04 0.06 Stand base (lengthxwidth) mm 135x91 180x120 250x150 Battery life approx. h 3500 Height gauge and marking-out system with signal probe Version Additionally with signal contact point. Particularly suitable for absolute measurements, comparison measurements and measurement of chained dimensions. Application The probe emits an acoustic signal when it touches the measured face. The measured value is also maintained when moving on (2 mm over-run), easy to use. The probe tip 0 is automatically compensated. Supplied with 1 battery No. 081560 size 357,1 cover, 1 carbide scriber No. 445230,1 signal contact point. Marking height mm 300 600 Digital height gauge 5 44 5222 and marking-out system with signal probe Reading mm 0.005 Error limit mm 0.02 0.04 Stand base (lengthxwidth) mm 135X91 180X120 Battery life approx. h 3500 3 44 5230 Spare scriber’ 5 trt 3Z3U carbide tipped Special accessories for height gauges and marking-out systems Universal square holding arm Suitable for 445004- No. 445000. 445180- No.445135,445152 and 445222. Application For holding dial indicators and lever indicators. Shank LxWxH mm Bore 0 mm 44 5004 Mahr Universal square holding arm 11.5x7x71 8 1445180 Mitutoyo Universal square holding arm 9x9x100 8 + 4 445180 Center-Master Suitable for Height gauges No. 445135,445152, and 445222. Application For measuring hole centre distances. For hole 0 mm S 44 5250 Center-Master (centring gauge) 1 -38 445250 Holder for MARUI-KEIKI protractors No. 453500,453800 and 454000 Suitable for No. 445135,445152, and 445222. Application For clamping the protractor to height gauges and marking-out systems. acnn Holder for clamping g 13 33ZU the protractor 453520 892 Main catalogue Hoffmann Group 46 With protractor No. 453500, holder No. 453520 (not included). With protractor No. 453500, holder No. 453520 (not included).