782 Каталог HOFFMANN GROUP 2015 Инструмент режущий слесарный измерительный Стр.782

Каталог HOFFMANN GROUP 2015 Tools Инструменты Ver 46 Стр. 782 0782 ENG Lab2u

ATOP Rhombus T-nut Material Quenched and tempered steel. Application For the insertion of the T-nut from above through the top of the T-slot. (Load capacity lower than No. 377500 due to reduced bearing surface). (j Insert rhombus (3 Twist rhombus T-slot nominal size / thread mm s 37 5330 T-nut Rhombus Nut height mm Wi a mm Ith e mm Height k mm T-slot nominal size / thread mm ffi 37 5330 T-nut Rhombus Nut height mm Wi a mm ith e mm Height k mm 12/M10 14 11.7 18 7 20/M18 24 19.7 32 12 14/M12 16 13.7 22 8 22/M20 28 21.7 35 14 16/M14 18 15.7 25 9 28/M24 36 27.7 44 18 18/MI 6 20 17.7 28 10 36/M30 44 35.6 54 22 Amp Rhombus T-bolt Version Forged Milled T-slots, rolled thread. Hardened to strength class 10.9. Application Later insertion of an additional clamping point is made easier on long tables. The T-bolt is inserted into the T-slot from above. iu T-slot nominal size x length L mm ffi 37 5335 Rhombus T-bolt Thread G mm b mm a mm e mm k mm 14X50 M12 35 13.7 22 8 14X80 M12 55 13.7 22 8 14X125 M12 75 13.7 22 8 18X63 M16 45 17.7 28 10 18X100 M16 65 17.7 28 10 18X160 M16 100 17.7 28 10 22X80 M20 55 21.7 35 14 22X125 M20 85 21.7 35 14 22X200 M20 120 21.7 35 14 28X100 M24 70 27.7 44 18 28X125 M24 85 27.7 44 18 28X250 M24 150 27.7 44 18 Amp Washers, extra strong to For threads M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M36 s 37 5340 Washer Bore dia. d, mm 6.4 8.4 10.5 13.0 15.0 17.0 19.0 21.0 23.0 25.0 28.0 31.0 38.0 External 0 d2 mm 17.0 23.0 28.0 35.0 40.0 45.0 45.0 50.0 50.0 60.0 68.0 68.0 80.0 Thickness h mm 3 4 4 5 5 6 6 6 8 8 10 10 10 AmP Spherical seat washers and collared washers 0 Standard Version DIN 6319 (form G similar to DIN 6319). Form C and D case-hardened, form G quenched and tempered. Application Angular compensation up to 3° when used in sets. 37 5355 - Form D may only be used over holes, so that the washer is in full contact. 37 5360- Due to its large diameter, form G is suitable even for clamping over the slot of forked clamps. 375350 375355 375350 375360 s. di d3 Form C Form D -C 62 ds Form G For threads M8 M10 M12 M14 M16 M20 37 5350 Spherical seat washer Form C s375355 Collared washer Form D s 37 5360 Collared washer Form G Bore dia. d , (375350) mm 8.4 10.5 13 15 17 21 Bore d2 (37 5355,37 5360) mm 9.6 12 14.2 16.5 19 23.2 External 0 d3 (375350) mm 17 21 24 28 30 36 External 0 d4 (375355) mm 17 21 24 28 30 36 External 0 d5 (375360) mm 24 30 36 40 44 50 Thickness h2 (37 5350) mm 3.2 4 4.6 5 5.3 6.3 Thickness h3 (37 5355) mm 3.5 4.2 5 5.6 6.2 7.5 Thickness h4 (37 5360) mm 5 5 6 6 7 8 Standard DIN 6340 Version Extra strong, flat-pressed and hardened, edges bevelled. gjfCgj Application Particularly suitable for clamps. Especially for making jigs and fixtures. 782 Main catalogue Hoffmann Group 46