773 Каталог HOFFMANN GROUP 2015 Инструмент режущий слесарный измерительный Стр.773

Каталог HOFFMANN GROUP 2015 Tools Инструменты Ver 46 Стр. 773 0773 ENG Lab2u

AmP Sliding clamp Version Clamping force 16 or 25 kN with tightening torque of approx. 100 Nm. Forged clamping element of alloyed quenched and tempered steel. Variable clamping height 0-180 mm. Supplied with Base element. Contact piece with flat face. T-nut DIN 508 with T-bolt strength class 12.9. 37 0090/0100- Base unit + support. 37 0110/0120- Base element + height element. Optional extras Contact pieces No. 370130 / 370140. 370090/370100 Height element 370110/370120 T-slot width mm 14 16 18 22 Clamping height h-H Clamping force A A, B B, C K mm kN mm s 37 0090 Amp Sliding damp, base unit 11-48 16 21.5 105 32 46 100 8-43 s 370100 0-63 25 32 135 40 54 135 32-97 s370110 AfTHKD Sliding clamp, with height element 60-120 25 90 198 40 54 150 32-84 s 370120 120-180 25 150 258 40 54 150 32-84 Fastening screw G (370090) M12 M12 M12 - Fastening screw G (37 0100,37 0110,37 0120) M12 M12 M16 M16 AfflP Mechanical collet (pull-down principle) Version Application Base body burnished Collet (interchangeable) of high-tensile aluminium. Clamping stroke 0.3 mm Drilled and indexed for the ZeroClamp zero-point clamping system. Suitable clamping stud No. 360025 18M6. Attachment can be with table clamps, T-nuts or zero-point clamping system. For clamping complex workpieces for 5-face machining. The negative shape of the workpiece is milled into the collet to allow a minimum nut clamping depth of 2 mm. Also particularly well suited for use with thin-walled materials. The collet can be milled out up to a depth of 42 mm. 0 D mm 0 D, mm 0D mm 0 E mm 0 F mm G mm H, mm h2 mm h3 mm h4 mm K mm L mm 0 M mm N mm ft 37 0129 Mechanical collet 99 23 117 106 102 80 15 35 56 106 13 8K7 25 M12 External 0 D mm 99 149 ft 370131 X6 Overall height H mm 50 50 jfeEaiqnli Compact clamps Version Body and pressure arm of hardened stainless steel, with high load capacity. 37 0142- Clamping force up to 16 kN. The pressure arm swings on a sprung ball and can quickly be exchanged without using any tools. Special nylon seal provides protection against the ingress of dirt. Advantage 37 0142- Compact design, approx. 30 smaller than comparable models. Time-saving automatic clamping and releasing. Standard DIN 912 socket head screws (M10 / M12) can be used. Supplied with 370145- Supplied with M10X25 socket head screws. Optional extras 37 0142- No. 370350 clamping wrench, No. 370430 pressure arms. 370142 67 Reach A mm k 370142 Garant Compact clamp Clamping height S mm Body dimensions LxWxH mm Pressure arm r mm Maximum clamping force kN Tapped hole for socket-head screws DIN 912 47 -1 to 90 95x35x81 75 16 M10/M12 67 -8 to 100 95x35x81 94 12 M10/M12 Height H mm k 370145 Garant Riser block for compact clamps Attachment thread with socket-head screw DIN 912 Body dimensions LxWxFI mm 80 M10x25 95x35x80 d9 JM12 M10 T i 80 h < ) , L J 370145_80 Main catalogue Hoffmann Group 46 773