741 Каталог HOFFMANN GROUP 2015 Инструмент режущий слесарный измерительный Стр.741

Каталог HOFFMANN GROUP 2015 Tools Инструменты Ver 46 Стр. 741 0741 ENG Lab2u

Garant Extension base with damping pot for mounting the centring vice Suitable for Version Material Application Centring vice No. 360130. With 2 holes for clamping studs No. 360025 18M16. Alternative attachment via stepless adjustable clamps or an M12 bolt in the T-slot. Attachment hole pattern for GARANT ZeroClamp zero-point clamping system (reference dimension 200 mm). Manual operation or air cushion movement across the machine table. Clamping pot with 0 90 mm or 120 mm for mounting the centring vice No. 360130. Steel 5-face machining on multi-axis machining centres. As a cost-effective clamping solution for use with the GARANT ZeroClamp zero-point clamping system or with pallet and automated systems. For type 80 120 36 0154 1 ’G'CTrt" Extension base with clamping pot LxWxH mm 320X120X125 Clamping studs ref. dimensions mm 200 Clamping pot 0 mm 90 120 j&Gaiant Multi-point clamping rail 120 mm - accessories Version All functional faces precision ground, pairing accuracy 0.03 mm. Base rails and jaws case hardened. Compact modular design, high clamping force up to 40 kN, maximum tightening torque 40 Nm. Attachment holes for GARANT ZeroClamp zero-point clamping system (200 mm pitch) as standard, can be mounted on clamping plates or matrix tables, or using table clamps. Ruler inset into the top face permits repeatable positioning of the clamp attachments in the serrations of the clamping rail. Variable pitches can be achieved using cross connectors. Conventional and Gripp clamping available. Clamping range can be extended individually. Easily clamped using a torque wrench. Application 5-face machining on multi-axis machining centres. As a cost-effective clamping solution for use with the GARANT ZeroClamp zero-point clamping system or with pallet and automated systems. Optional extras Clamping jaw variants, magnetic strip, workpiece backstops see No. 360112 to 360127. Torque wrench see No. 656050 size 60, clamping studs No. 360025 size 18M16. Rail length mm 300 600 1 36 0110 lAomnfl Clamping rail 120 LxWxH mm 300X120X60 Accessories Suitable for Clamping rail No. 360110. Application Variable pitches can be achieved using crossed clamping rails. 1360112 IAc-rt-1 Cross connector Note Torque and clamping force are standard values and are only indicative reference points (material-dependent). Jaw width mm 120 1360114 1 i&cmf 1 Pull-down iaw Torque Nm 10/20/30 Clamping force kN 17/30/50 Jaw width mm 120 1360115 li&Gnif 1 Parallel iaw Torque Nm 10/20/30/40 Clamping force kN 10/20/30/40 Suitable for Base jaw No. 360119 size P, front jaws / top jaws No. 360122 - 0125. Jaw width mm 120 1360116 j&Gmnt Fix iaw Suitable for Application Clamping pot No. 360040 size 10012 and 10148. Zero-point clamping system with variable pitches. Jaw width mm 120 1360117 1 j&cmnf 1 Clamping pot socket 360114 360115 360116 360117 Main catalogue Hoffmann Group 46 741