700 Каталог HOFFMANN GROUP 2015 Инструмент режущий слесарный измерительный Стр.700

Каталог HOFFMANN GROUP 2015 Tools Инструменты Ver 46 Стр. 700 0700 ENG Lab2u

Revolving lathe centre, plain shank Version Sprung version for axial length compensation whilst machining. Fully hardened and ground. Special seal prevents ingress of dirt and coolant. Maintenance-free, lubricated for life. Application Flexible application thanks to exchangeable inserts. For general use on turrets and counter-spindles on CNC machines. Optional extras For exchangeable inserts see No. 320625. 32 0615 55 32 0615 Rpvnlving s 32 0616 lathe centre, s 32 0617 pldm ihdrik Body 0D (320615) mm 40 Body 0D (32 0616,32 0617) mm 44 0 0, mm 12 0d (320615,320616) mm 20 0d (320617) mm 25 L (320615) mm 90 L (320616,320617) mm 118 L, (320615) mm 38 L, (320616,320617) mm 51 Sprung travel (320615) mm 2.4 Sprung travel (320616,320617) mm 3 Max. speed (320615) rpm 4000 Max. speed (32 0616,32 0617) rpm 3000 For component weight (320615) kg 200 For component weight (320616,320617) kg 300 Radial run-out mm 0.01 32 0617 -El Et iCbGarant' Exchangeable inserts for the revolving lathe centre with plain shank Suitable for Version Lathe centre No. 320615 - 320617. High flexibility due to range of geometries on the same carrier tool. Fully hardened and ground. Quick and efficient exchange of worn tools. Type 1 2 3 4 5 6 1320625 Inserts for the revolving lathe centre 00 mm 14 14 17 28 20 14 0 D, mm 4 13 10 4 0 d mm 12 12 12 12 12 12 L, mm 32 20 23 23 23 15 R Hm Lightweight revolving lathe centre Application Point angle 60°. Lightweight version with slim body. Precision roller bearings for high concentricity. Maintenance-free, lubricated for life. Special seal prevents ingress of dirt and coolant. Mainly used for machining small and smallest parts on all types of lathes. Morse taper 2 3 4 5 33 nfiSn Lightweight revolving s uoau ,athe centre Body 0x reach B mm 32X62 34X62 42X75.5 58X104 Largest centre point 0 60° A mm 15 15 20 30 Maximum radial run-out mm 0.005 0.005 0.005 0.010 For component weight kg 200 400 800 1600 liiSON Revolving lathe centre 0 Version Application Point angle 60°. Lightweight version, maintenance-free. The special design allows adjustment of the radial play. For machining small components. Morse taper 2 3 4 5 a 37 n i;<; Lightweight revolving S SZ U033 athe poim Largest centre point 0 60° A mm 24 28 38 50 Reach B mm 73 85 94.5 116.5 Centre point length C mm 26.5 32.5 43.5 55.5 Body 0 D mm 44 48 60 75 Overall length L mm 137.5 166 196.5 246 Maximum radial run-out mm 0.006 0.006 0.006 0.006 Maximum speed rpm 8000 6000 4500 4000 For component weight kg 100 200 400 650 700 Main catalogue Hoffmann Group 46