1476 Каталог HOFFMANN GROUP 2015 Инструмент режущий слесарный измерительный Стр.1476

Каталог HOFFMANN GROUP 2015 Tools Инструменты Ver 46 Стр. 1476 1476 ENG Lab2u

Torque analyser 1 ACCU TEC torque cut-out screwdriver to DIN ISO 5393, VDI / VDE 2647 FEIN ACCU TEC shut-off screwdrivers are designed for the most demanding applications requiring precise screw tightening in series production. Brushless EC motors with strongly extended working life and up to 80% lower maintenance costs. Restart delay after the screw tightening, to avoid "follow-up"; and also restart inhibit if the remaining battery charge is insufficient to perform the screw tightening. Small screw tightening tolerances for high screw tightening quality. Precise and consistent tightening torques in any screw tightening application. Auditable screwdrivers, CmK value > 2.0 at ± 10 (based on 6 sigma) to ISO 5393 VDI/VDE 2647. Note See No. 65 4300 ff. for torque analysers. The manufacturer's warranty conditions can be found on page 1470. See No. 654351 for torque sensors / rotational angle sensors. Calibration service on request. 654300 (Ul to ACCU TEC cordless screwdriver ASM Version Cut-out screwdriver for Li-ion battery with 1/4” hex bit-holder E 6.3), maintenance-free up to 500,000 screw connections. 2-3 times more screw connections per battery charge (than with an NiCd battery). The release torque is 25% above the tightening torque. Supplied with Without battery, charger or setting tool. Manufacturer ID 711228 711257 m i1 nn Centre handle screwdriver g07 H09 ASM144V Manufacturer's designation ASM 14-6 ASM 14-12 Torque range Nm 1.2-6 3-12 Maximum speed rpm 600 500 Weight including battery kg 1.3 1.3 ACCU TEC baton offset screwdriver ASW Version Shut-off screwdriver for Li-ion battery. Maintenance-free up to 500,000 screw fastenings. 2-3 times more screw connections per battery charge (than with an NiCd battery). Supplied with Without battery, angle head or setting tool. Manufacturer ID 711258 m i no Baton offset screwdriver 3071123 ASM 144 V Manufacturer's designation ASW 14-14 Torque range Nm 3-14 Maximum speed rpm 400 Weight including battery kg 1.4 ACCU TEC torque shut-off screwdriver with parameter control Version Torque shut-off screwdriver with parameter control for easy and individual programming on a PC, using the programming adaptor (No. 071135 size 92604163). Freely programmable parameters Speed, direction of rotation, angle of rotation, torque threshold and time. Up to 5 programmable steps. Precise configuration for each screw tightening application. Final switch-off by mechanical clutch. Ideal for optimising the process and time. Supplied with Battery, charger, adjustment wrench and angle head are not included in the scope of supply. Size 711253 - 3/8 inch angle head included in the scope of supply. Manufacturer ID 711254 711255 711256 711250 711251 711252 711253 071111 H Cordless screwdriver with parameter control 14.4 V 07 11 Baton set screwdriver 8 with parameter control 14.4V Manufacturer's designation ASM ASM AS 7 ASW ASW ASW ASW 14-6 PC 14-9 PC 14-12 PC 14-6 PC 14-10 PC 14-14 PC 14-30 PC Torque range Nm 1.2-6 2-9 3-12 1.5-6 2-10 3-14 12-30 Maximum speed rpm 50- 1000 50 - 750 50 - 750 50 - 700 50 - 700 50 - 530 20 - 260 Weight including battery kg 1.3 1.3 1.3 1.4 1.4 1.4 2.0 Tool holder 3/8" 3/8" 3/8" 1476 Main catalogue Hoffmann Group 46