1048 Каталог HOFFMANN GROUP 2015 Инструмент режущий слесарный измерительный Стр.1048

Каталог HOFFMANN GROUP 2015 Tools Инструменты Ver 46 Стр. 1048 1048 ENG Lab2u

holejC. Flap wheel 0 Cupped flap wheel standard Aluminium Oxide (A) Version Cup shaped strip arrangement around the shank of the tool, with recessed core. Shank 0 6 mm. Application Particularly suitable for peripheral and internal face sanding. Head 0x head width mm 60x40 =5 k 55 5000 60 grit 10 K 55 5010 Cupped flap wheel (A) 80 grit 10 k 55 5030 150 grit 10 Shank 0 mm 6 Recommended speed rpm 6300 Maximum speed rpm 10000 (T) Peripheral sanding Face grinding Aluminium Oxide (A) Garant HOLEX Combi cloth / non-woven flap wheel Suitable for/ Vc m/s AIMg <900 N < 1400 N <55 HRC <60 HRC <67 HRC Carbide INOX Ti GG(G) CuZn Plastics & GRP Wood Stone Varnish Uni max 55 4906-4977 - 8 0 m Version Flap strips bonded on to the shank of the tool. Shank 0 6 mm. 55 4906- Especially wear-resistant and fine-structured fleece. Ideal for use on stainless steel. 554910-4930- Non-woven abrasive is combined with abrasive cloth to increase the abrasive effect. 55 4950-4970- The non-woven abrasive generates a polishing effect for an even surface finish. 55 4975-4977 - Abrasive fleece laid down in a sinusoidal pattern without cut edges, for matt finishes and polished finishes without abrupt changes in texture. Application For removal of dirt and oxide layers on metals as well as for matt finishing of Cr-Ni, other stainless steels, and also non-ferrous metals. Head 0x head width mm 30x20 40x20 50x20 60x30 80x50 100x50 O Grit comparison 55 4906 1 Xb Garant" Flap wheel fleece fine 10 180 k 55 4910 HOLBC. Flap wheel fleece / linen medium 10 100/80 k 55 4920 fine 10 180/150 k 55 4930 very fine 10 280/240 k 55 4950 holbC. Flap wheel fleece medium 10 100 k 55 4960 fine 10 180 s 55 4970 very fine 10 280 k 55 4975 holbC. Flap wheel fleece sinusoidal medium 10 100 s 55 4976 fine 10 180 s 55 4977 very fine 10 280 Recommended speed rpm 7500 4000 3000 Maximum speed rpm 14000 14000 11000 9000 7000 6000 HOLEX Abrasive strip wheel Suitable for/ vc m/s AIMg <900 N <1400N <55 HRC <60HRC <67 HRC Carbide INOX Ti GG(G) CuZn Plastics & GRP Wood Stone Varnish Uni max 555145/5150- O S'jijS Version Abrasive strip wheel with Aluminium Oxide (A) on fabric. Bore 0 54 mm. Application Removing and cleaning up weld seams, grinding large areas, 0 5 anc workpieces that have an irregular profile. Note For mounting on shafts smaller than 0 54 mm, use the metal flange No. 55 5140, which can be bored out to suit. Other sizes available on request. Grit 40 60 80 120 180 Maximum speed rpm k 555145 Abrasive strip wheel 165x30 mm 5200 s 55 5150 (A) 165x50 mm 5200 Suitable for bore 0 mm 54 m ci An Metal reducing flange pair, s can be bored out 0 54 mm 555140 1048 Main catalogue Hoffmann Group 46 554906 554910 55 4950 555150