1003 Каталог HOFFMANN GROUP 2015 Инструмент режущий слесарный измерительный Стр.1003

Каталог HOFFMANN GROUP 2015 Tools Инструменты Ver 46 Стр. 1003 1003 ENG Lab2u

Mahr Surface roughness measuring tool MarSurf PS1 mm/ /Inch RS232C Q Directly selectable parameters Ra, Rz. Q Freely programmable button. Direct access fo any of 30 parameters of your choice. Q USB port PS1 is recognised without a driver, Start button, right and left. Easy to operate left-handed or right-handed. O Probe (2 pm) with removable probe guard. They measure to the standard with 0.7 mN gauging force. O Integral calibration standard. No external calibration standard necessary (patent applied for). Q Large-size display. All information at a glance. Includes a simple mounting for height adjustment. Even measurements on conical surfaces etc. are possible. Type PS1 49 8845 , -ij uutj Surface roughness measuring tool Maximum metric measuring range jim 350 Cut-off (AJ metric mm 0.25; 0.8; 2.5 Measurement travels to standard mm 1.75 / 5.6 / 17.5 / automatic Measurement travel for longitudinal sensing 1.25/4.0/12.5 Scanning speed mm/s 0.5 Evaluation unit lengthxwidthxheight mm 140X50X70 Weight of the evaluation unit kg 0.4 Explorer software for GARANT ST1 and Mahr PS1 / M300 Version The Explorer software accepts data from the GARANT ST1, MarSurf PS1 or M300 and displays it. Documents and logs the results and profiles. Up to 15 roughness profiles can be displayed. 49 8847 Explorer software Surface comparison plates RUGOTEST Version The comparison plates contain the surface conditions for the most common types of machining. Wear-resistant and stainless. Application For comparative checking of surface finishes using visual and tactile method (with finger nail). Type 1 102 103 104 105 107 1498861 a“sonplates Machining method General Turning Face milling Surface grinding Cylindrical grinding Spark erosion Number of comparison patterns 27 6 6 8 8 6 Plate dimensions mm 120x90 110x50 110x50 130x50 130x50 110x50 Comparison ranges Ra ISO roughness classes 0.05-12.5 0.4-12.5 0.4-12.5 0.025 - 3.2 0.025 - 3.2 0.4-12.5 N2-N10 N5-N10 N5-N10 N1 -N8 N1 -N8 N5-N10 Mahr Roughness standard with test certificate Version Metal roughness standard Ra approx. 2.5 nm, SM > 130 jm, Rz approx. 10 nm with test certificate. Type PRN10 5 49 9580 Roughness standard with test certificate Version Portable roughness measuring device for precise roughness measurement and documentation conforming to standards, using the stylus tracing method. With integral calibration standard. Automatic cut-off selection. Memory capacity for 15 profiles and up to 20,000 measured values. Phase correction Gauss filter to DIN EN ISO 16610-21 (supersedes DIN EN ISO 11562). Up to 5 measurement travels can be selected. Attention German version. Order free GB adapter plug No. 08 1174_GB. Advantage Error-free operation due to settings compliant with standards. Switch on and start measurement right away - intuitive, no training. 3 parameters directly with one keystroke, 25 built-in parameters. Supplied with Supplied with feed unit, standard probe No. 499004 size 6-350, roughness standard, including works calibration certificate, height adjustment, probe guard, charger / mains adapter, instruction manual, carrying case with shoulder strap and belt attachment, mini-USB cable. Optional extras Spare and special probe No. 499004. Probe extension No. 499008. Perfect for overhead measurements. Place on the part, start measurement, done. Even small components can be measured without any additional mounting. Main catalogue Hoffmann Group 46 1003