1314 Каталог MITSUBISHI 2015 Токарный и вращающийся инструмент Инструментальные решения Стр.M022

Каталог MITSUBISHI 2015 Металлорежущий инструмент Стр. M022 1314 ENG Lab2u

TOOLING TOOLING SYSTEM HSK SYSTEM FEATURES OF THE HSK SYSTEM Suitable for high speed machining. When the taper hole is slightly seperated during high speed machining due to centrifugal force the taper axis is continuously in contact with the taper hole because of elastic deformation. Thus 2 face holding is maintained. Guaranteed high accuracy. Installation repeatability of 2jum is guaranteed. High rigidity. High rigidity in the radial and thrust direction due to the 2 face holding system. Easy installation. Detachable support structure ensures separation of the tool even when the tool has undergone thermal expansion. Coolant system selection. Center coolant and anglar flow coolant type. HSK stands for Hole (Hollow) Schaft (axis) Kegel (taper) in German. HSK CLAMPING METHOD 30Conical Face Temporary Clamp Position 'The spindle taper face and the tool taper kface contact. Clearance Tapered Tool (Tool) Taper Hole (Spindle) The 30conical face of the taper axis is pulled in the direction of the tapered hole to clamp. Temporary clamp position has a clearance between the spindle and the tool contact faces. Taper clamping force increases as the diameter increases. Hollow thin taper axis holds the taper faces and the contact faces tightly due to pressurized elastic deformation. Permanent Position Tapered Tool (Tool) Taper Hole (Spindle) M022