METALCUTTING SAFETY DANGEROUS FACTOR SAFETY COUNTERPLAN Sharp cutting edge of cutting tools may cut your bare-hand Use gloves when pulling out the insert f

METALCUTTING SAFETY DANGEROUS FACTOR SAFETY COUNTERPLAN Sharp cutting edge of cutting tools may cut your bare-hand Use gloves when pulling out the insert from the case or mounting it on the machine Inappropriate conditions or usage may cause fragmentation and expel parts of tools which may cause injury Use glasses or safety cover for your safety Use the tools within the recommended range Please refer to catalogue and safety guidelines first. Severe load on tool and premature wear of cutting edge may bring excessive cutting force on tool, causing fracture of the tool and may cause injury Use glasses or safety cover for your safety Change the tool as required before excessive wear or fracture Chips evacuated during cutting are hot and sharp and may cause burns and cuts Use glasses or safety cover for your safety Stop machining and put safety glove on and use a hook tool to remove chips Cutting tools Touching the workpiece immediately after cutting may cause burns Use gloves or safety cover for your safety Be aware of sparks, fire, or explosion of hot chips generated during the cutting operation Do not use at the place where having explosive materials Prepare for fire extinguishments In case of high RPM machining, vibration and chattering may occur due to the improper balance of the machine Use glasses or safety cover for your safety Check first if there's any chattering, vibration or strange noises prior to your main cutting operation Touching a burr remaining on the workpiece with a bare-hand may cause a cut Do not touch the burr with bare-hand Use gloves or safety cover for your safety Loose clamping of the workpiece may cause the tool to fracture and result in damage to the cutter body and possible injury Clamp the workpiece tightly Tools are operated to right-hand direction normally. Left-hand direction operation can cause fracture of tool and body damage Do not use left-hand direction without notice Check the package of product to check the availability of left-hand operation Indexable tools Loose clamping of inserts and parts may result in ejection of the tool during cutting and may cause serious injury Check the clamping of inserts and parts prior to machining, and use original parts only Over loaded clamping of inserts by a lever (such as a pipe) may cause dangerous fracturing of parts and inserts Do not use lever inappropriately In case of high speed machining, parts and inserts can be forced out by centrifugal force Use within recommended condition Use glasses or safety cover for your safety Since cutter has sharp cutting edges touching with a bare-hand may cause a cut Use gloves or safety cover for your safety Rotating tools It is dangerous to use glove with rotating machine Contact with body or clothes is dangerous with rotating parts Do not wear gloves when you work with rotating machine Keep your body and clothes away from rotating machine Vibration generated by balancing trouble may cause a fracture and ejection of the tool which may cause serious injury RPMshould be controled within recommended condition Check the balance of rotating part periodically In case of drilling, the uncut bottom core can fly out of the part with high speed and cause serious injury Use gloves or safety cover for your safety The edges of small diameter drill are sharp and easy to break Use gloves or safety cover for your safety Brazed tools Fragmentation and ejection of brazed carbide tip may cause injury Check the brazed tip before using. Do not use at high temperature cutting condition ETC There's a possibility of breaking the carbide tip after several brazing Do not use brazing a tip that has been brazed several times Abusing may cause fragmentation of tool and is very dangerous. Stick to safety regulations and guidelines