206 Каталог KYOCERA 2014 Металлорежущий инструмент для точения сверления фрезерования Стр.E16

Каталог KYOCERA 2014 Металлорежущий инструмент Стр. E16 0206 ENG Lab2u

Small Tools External cutting Inserts For KTKF Toolholder When using TKF-AS type The KTKF toolholder can be used as a multi-functional tooling for non-ferrous metals and non-metals when combined with a TKF-AS insert. (Fig.1) Example of spool cutting Fig.1 Example of the pass of KTKF toolholder + TKF-AS insert Applicable Inserts (Ref. page C31) Applicable Range Insert Photo shows Right-hand Description TKF12& 200-AS 250-AS TKF16& 250-AS Right-hand shown TKF12L 200-ASR 250-ASR Insert hand Left-hand / Turning / Grooving PCD edge hand Right-hand TKF16L 250-ASR m TKF12& 150-NB Grooving (Turning is possible) Right-hand shown 200-NB 250-NB 250-NB4.5 PCD Inserts for turning and Grooving Not recommended for cut-off Inserts Identification System TKF 12 R 200 - TKF 12 L 200 - AS R Applicable Toolholder E12 Recommended Cutting Conditions E45 Note 1) The cutting edge of the TKF-AS/-ASR will be 1 mm lower than the center line when attached to the KTKF toolholder (Ref. to Fig.2). Adjust the height by making NC lathe parameter settings or inserting a plate. 2) If the 1 mm adjustment is not possible, use the TKF..-NB. (Ref. to Fig.3) KTKF Toolholder Fig.2 When a TKF-AS/-ASR insert is attached (The cutting edge is 1mm lower than the center line.) KTKF Toolholder Fig.3 When a TKF-NB inserts is attached E16