547 Каталог ISCAR 2017 Вращающийся режущий инструмент и инструментальная оснастка Стр.543

Каталог ISCAR 2017 Ротационный инструмент Стр. 543 0547 ENG Lab2u

543 DCT (M8-M24) Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes HR Обозначение Designation D min(2) Dnominal(3) D max D2 d L L5 L1 L4 Po. Size Th(4) / DCT 068-021-14B-M8 (1) 6.80 6.80 7.40 13.90 14.00 20.9 24.50 41.9 45.0 6.8 M8 SR 34-508 T-7/51 K DCM- 8 DCT 085-026-14B-M10 8.30 8.50 8.90 14.00 14.00 26.3 29.00 46.5 45.0 8.0 M10 SR 34-508 T-7/51 K DCM- 8 DCT 102-030-14B-M12 10.00 10.20 10.90 14.00 14.00 30.0 31.90 52.0 45.0 10.0 M12 SR 34-508 T-7/51 K DCM-10 DCT 120-035-16B-M14 12.00 12.00 12.90 16.00 16.00 34.9 36.90 58.0 48.0 12.0 M14 SR 34-508 T-7/51 K DCM-12 DCT 140-039-18B-M16 14.00 14.00 14.90 18.00 18.00 39.0 41.00 60.0 48.0 14.0 M16 SR 34-508 T-7/51 K DCM-14 DCT 175-042-20B-M20 17.30 17.50 17.90 21.00 20.00 42.0 43.80 63.0 50.0 17.0 M20 SR 34-508 T-7/51 K DCM-17 DCT 210-048-25B-M24 21.00 21.00 21.90 25.50 25.00 48.2 50.50 69.0 56.0 21.0 M24 SR 34-508 T-7/51 K DCM-21 Hole tolerance: D+0.05 in average conditions. However, it can be higher or lower according to machine and tooling conditions. For user guide and cutting conditions, see page 544 (1) Reduce recommended feed for DCT 6.8 mm drills by 10% (2) Do not mount smaller drilling heads other than the specified range of the drill body (3) Pre-thread hole diameter (4) Used for standard thread size For inserts, see pages: AOMT-Chamfering (543) IDI-SG (513) IDI-SK (513) Размеры в мм Dimensions Tough Hard Обозначение Designation l W S a° co o o o 5 o 9 o AOMT 060204-45HD 5.66 4.50 1.96 45.5 AOMT 060204-45DT 5.66 4.50 1.96 45.5 AOMT 030204-N-45DT (1) 2.80 4.00 1.59 45.5 AOMT 030204-N-30DT (1) 4.00 4.00 1.59 30.5 The cutting speed is dependend on the drilling insert being used (1) For low carbon steel INDEXABLE DRILLS