Setting instructions F 2254 Indexable insert SNHQ 1205 ZZN (0 Clamping screw for indexable insert ( Setting key ( Master screw Setting instructio

Setting instructions F 2254 Indexable insert SNHQ 1205 ZZN (0 Clamping screw for indexable insert ( Setting key ( Master screw Setting instructions 1. Insert the indexable insert in the cleaned insert seat and tighten the clamping screw to 26 in lbs of torque. During this process the setting key must be loose. If necessary, release the setting key using the master screw and re-insert and tighten the indexable insert. 2. Check the axial runout and adjust the indexable insert to its greatest axial height above the setting key at around 0.002 inch then align all the other Indexable inserts to the same height. Check axial run out again. 3. Do not retighten the indexable insert clamping screw F 429 Technical information Milling WALTER Valenite