245 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.A241

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. A241 0245 ENG Lab2u

Turning External machining WALTER Valenite Walter CaptoTM C DCMN Walter Turn 45' toolholders for turning / milling center negative toolholder range external machining rigid clamping system Tool d1 f l4 Dmin2 f l4 Dmin2 Designation in mm Y As Type Walter CaptoTM ISO 26623 k 95° C5-DCMNN-00105-12 12 C5 0 4.134 4.331 0 105 110 -6° -6° CN..43.. CN..1204.. C6-DCMNN-00090-12 12 C6 0 3.543 4.331 0 90 110 -6° -6° C6-DCMNN-00115-12 12 C6 0 4.528 4.331 0 115 110 -6° -6° C6-DCMNN-00090-16 16 C6 0 3.543 4.331 0 90 110 -6° -6° CN..54.. CN..1606.. C8-DCMNN-00150-16 16 C8 0 5.906 4.528 0 150 115 -6° -6° Measured with master insert CN 120408 / CN 160612. Bodies and assembly parts are included in the scope of delivery. For information on the rake angle y (for indexable inserts without geometry) and on the inclination angle Xs, see page A 453. For information on Dmin2, see page A 453. Assembly parts Type Shim Screw for shim Clamp Screw for clamp Tightening torque Pressure spring Pin Torx key Cooling lubricant nozzle C5 Cooling lubricant nozzle C6 Cooling lubricant nozzle C8 CN..43.. CN..1204.. AP301-CN12 FS1461 (Torx 15IP) PK241 FS1473 (Torx 15IP) 3.9 Nm FS1470 RS117 FS1465 (Torx 15IP/SW 3.5) FS1476 FS1479 CN..54.. CN..1606.. AP302-CN16 FS1463 (Torx 20IP) PK242 FS1474 (Torx 20IP) 6.4 Nm FS1471 RS117 FS1464 (Torx 20IP) FS1479 FS1479 Accessories CN..43.. CN..54.. Type CN..1204.. CN..1606.. n r Clamp set PK241-SET PK242-SET Hg (standard mounting parts) Clamp set with PK245-SET PK246-SET “fS carbide clamping plate A 241