468 Каталог SUMITOMO 2015 Режущий инструмент и инструментальная оснастка Стр.464

Каталог SUMITOMO 2015 Инструмент и оснастка Стр. 464 0468 ENG Lab2u

Replaceable Tip Drills Features & Benefits SMD Features & Benefits Available in metric and inch diameters ranging from 0.4688" - 1.2008" (30.5 mm) Available in 3X, 5X and 8X diameter hardened steel bodies that can accept multiple diameters Three styles of drill tips to maximize performance SMDT-MTL - standard edge preparation for steel applications SMDT-MEL - light edge preparation for super alloys, stainless steels, and cast irons SMDT-MTL-C - chamfered edges to eliminate break out in cast iron SMD carbide tips have Sumitomo's patented wear resistant DEXTM coatings Ground serrations on back of drill tip allow for precise assembly and superior repeatability Every drill tip is made with the famous Sumitomo Point Drill tips are capable of being reground Coolant through drill bodies Easy Assembly 1.) Confirm drill tip is compatible with drill body by checking diameter range listed on shank. 2.) Place SMD replaceable carbide head on SMD drill body so that the screw mounting holes line up. 3.) Insert assembly screws and tighten securely after screw mounting holes are lined up. Note Mounting screws will only engage when the SMD replaceable carbide head is in the correct position. SMD Features & Benefits 3X Diameter 5X Diameter 8X Diameter Recommended Speeds and Speed v (sfm) / Feed f (ipr) Feeds MTL MTL MTL MTL MTL-C / MEL MEL MEL MEL Material Steels Steels Prehard Steels Die Steels Ductile cast irons Gray cast irons Titanium Inconel Stainless Steels Drill Dia. (inch)