450 Каталог SUMITOMO 2015 Режущий инструмент и инструментальная оснастка Стр.446

Каталог SUMITOMO 2015 Инструмент и оснастка Стр. 446 0450 ENG Lab2u

MicroDrills/DLC Coated Drills Mini MultiDrills MDSS Type Mini MultiDrills 00.80 to 01.00mm Catalog Number Stock 0Dc (mm) Dimensions (mm) Style I Is MDSS0080 0.80 MDSS0081 0.81 MDSS0082 0.82 MDSS0083 0.83 MDSS0084 0.84 10 23 MDSS0085 0.85 MDSS0086 0.86 MDSS0087 0.87 MDSS0088 0.88 MDSS0089 0.89 MDSS0090 0.90 Fig2 MDSS0091 0.91 MDSS0092 0.92 MDSS0093 0.93 MDSS0094 0.94 11 22 MDSS0095 0.95 MDSS0096 0.96 MDSS0097 0.97 MDSS0098 0.98 MDSS0099 0.99 MDSS0100 1.00 12 21 H = Worldwide Warehouse item available in 10 business days Recommended Cutting Conditions (Wet) Feed Rate=ipm / mm/min Structural Steel Carbon Steel Gray Cast Iron Alloy Steel Pre-hardened Steel Die Steel Tempered Steel Hardened Steel 40-50 HRc Hardened Steel 50-55 HRc Ductile Cast Iron Stainless Steel 0.20 - 0.29 mm RPM 31,800 26,500 21,200 12,700 10,600 31,800 10,600 Feed Rate 2.362 / 60 1.969 / 50 1.575 / 40 1.181 / 30 0.787 /20 2.362 / 60 0.787 /20 Step Feed 0.1XD 0.1XD 0.1XD 0.1XD 0.1XD 0.1XD 0.1XD 0.30 - .39 mm RPM 31,800 26,500 21,200 12,700 10,600 31,800 10,600 Feed Rate 3.937 / 100 3.150 / 80 2.362 / 60 1.575 / 40 1.181 / 30 3.937 / 100 1.181 / 30 Step Feed 0.1XD 0.1XD 0.1XD 0.1XD 0.1XD 0.1XD 0.1XD 0.40 - .49 mm RPM 31,800 25,900 19,900 12,700 9,900 31,800 9,500 Feed Rate 5.118 / 130 3.937 / 100 3.150 / 80 1.969/50 1.575 / 40 5.118 / 130 1.575 / 40 Step Feed 0.1XD 0.1XD 0.1XD 0.1XD 0.1XD 0.1XD 0.1XD 0.50 - .59 mm RPM 31,800 25,500 19,100 12,700 9,500 31,800 9,500 Feed Rate 7.480 / 190 5.906 /150 4.330 / 110 2.362 / 60 1.969/50 7.480 / 190 1.969 /50 Step Feed 0.1XD 0.1XD 0.1XD 0.1XD 0.1XD 0.1XD 0.1XD 0.60 -1.00 mm RPM 23,900 15,900 12,700 8,000 5,600 19,100 5,600 Feed Rate 14.173 / 360 9.449 / 240 3.543 / 90 3.937 / 100 2.362 / 60 11.417 / 290 3.150 /80 Step Feed 0.2XD .5XD 0.2XD .5XD 0.2XD .5XD 0.1XD 0.1XD 0.2XD .5XD 0.1XD Step feed is recommended for drilling of holes deeper than 3XD 1) The conditions above are recommended under wet conditions, using water-soluble coolant. 2) If machine noises and vibrations are present, adjust the cutting conditions accordingly. 3) If the machine cannot achieve the recommended spindle speed, use the maximum spindle speed available. 446