313 Каталог SUMITOMO 2015 Режущий инструмент и инструментальная оснастка Стр.311

Каталог SUMITOMO 2015 Инструмент и оснастка Стр. 311 0313 ENG Lab2u

SumiMill GOALMILL Cast Iron Roughing & Finishing Face Mill SumiMill GOALMILL Fig. 1 T E 0d. Applicable Insert LNGX Di Fig. 2 A 0D 0d 0101.6 Fig. 3 A 0d 0D 0D GOALMILL Cutter Bodies Catalog Number Stock Dimensions (inch) of Teeth Fig. 0D 0D1 0d a b E F Roughing Wiper GFV53000R 3.000 2.900 1.000 0.375 0.220 1.060 2.000 6 2 1 GFV54000R 4.000 3.380 1.500 0.638 0.385 1.060 2.000 10 2 1 GFV56000R 6.000 4.880 2.000 0.761 0.438 1.000 2.500 12 4 2 GFV58000R 8.000 6.040 2.500 1.136 0.560 1.595 2.500 20 4 3 Effective Cutting Dia. Sd =aa Jot e Shoulder Milling Face Milling High Feed Milling Multi- purpose Mod ular Tooling DFO & SnmiMill Discon- tinued 2.352 3.342 5.342 7.342 NOTE Left-handed cutters are made to order GOALMILL Inserts & Hardware Cartridge & Hardware 1 r Micro Adjustment Check each of the fixed pocket milling inserts to find the one at the highest setting. / / Wiper Cartridge Cartridge Mount Screw Wrench for Cartridge Mount Screw Axial Adjustment Screw Wrench for Adjustment Screw Load the wiper cartridges into the face mill body and torque GFVK5R BX0418 LT15 ED090225E TTX15W the cartridge mount screw Insert not included with cartridge Recommended Running Conditions Adjust the wiper cartridge using the axial adjustment screw so that it is .0010" .0012" above the highest fixed pocket milling insert Gray Cast Iron Grade SFM D.O.C. IPT K244L9 450 1150 0.004 0.030 0.004 0.015 K246L9 400 650 SN2100K 1000 3000 0.010 0.080 0.004 0.010 Ductile Cast Iron Grade SFM D.O.C. IPT K244L9 450 800 0.004 0.030 0.004 0.015 K246L9 400 600 Greater depths of cut (up to 4mm) possible if wiper cartridges are removed. NOTE If the wiper inserts will be indexed without presetting the wiper cartridge heights again, the first preset height should be from 0.001" to 0.002" (0.025 to 0.050 mm) above the highest fixed pocket periphery insert. 311 D D F E E F