250 Каталог SUMITOMO 2015 Режущий инструмент и инструментальная оснастка Стр.248

Каталог SUMITOMO 2015 Инструмент и оснастка Стр. 248 0250 ENG Lab2u

Threading, Grooving, & Cut-Off Holders Grooving Toolholders GND Series Grooving Toolholders GND Series - Metric Nomenclature Nomenclature for OD Groover GND Series (METRIC) GND M R/L 2525 M - 3 12 1- 3 4 5 6 7 8 9 1-3 Series Name 4 Application 5 Handedness 1 Groove 2 New 3 Depth M Multi-function R Right Handed L Deep Groove L Left Handed MS 90° Multi LS 90° Deep 6 Shank Size (mm) 1010 10 x 10 mm 1212 12 x 12 mm 1616 16 x 16 mm 2020 20 x 20 mm 2525 25 x 25 mm 7 Overall Length JX 120 mm K 125 mm M 150 mm 8 Seat Size Nomenclature for Face Grooving Holders GND F R/L 2525 M - 3 18 - 090 1- 3 4 5 6 7 T 8 1-3 Series Name 4 Application 5 Handedness 6 Shank Size (mm) 1 Groove 2 New 3 Depth F Face Groover R Right Handed 2020 20 x 20 mm L Left Handed 2525 25 x 25 mm mm (Inch) 035 35mm (1.378 040 40mm (1.575 045 45mm (1.772 050 50mm (1.969 065 65mm (2.559 085 85mm (3.346 mm (Inch) (cont.) 090 90mm (3.543" 100 100mm (3.937" 125 125mm (4.921" 140 140mm (5.512" 180 180mm (7.087" 280 280mm (11.024" 9 Max Groove Depth (mm) 10 12 12.5 14 16 18 20 23 25 9 10 7 Overall 8 Seat Length Size K 125 mm 2 M 150 mm 3 4 5 6 9 Max Groove Depth (mm) 12 18 23 2 3 4 5 6 Insert Nomenclature (METRIC) GCM N 30 02 -GG -AC530U 1-3 Series Name 1 G Grooving Insert 2 C 7° Relief Angle 3 M Molded Tolerance N Neutral 1- 3 4 Handedness R Right Handed L Left Handed 4 5 6 7 5 Seat Size & Groove Width Seat Groove Width 20 2 2.0 mm 30 3 3.0 mm 40 4 4.0 mm 50 5 5.0 mm 60 6 6.0 mm 6 Corner Radius 10 02 =0.2mm 04 =0.4mm 08 =0.8mm 8 7 Chipbreaker GG Std. Feed Deep Groove GL Low Feed Deep Groove MG Std. Feed Traverse ML Low Feed Traverse RG Full Radius Profiling 8 Grade AC520U Universal Grade For most materials AC530U Universal Grade For most materials AC830P Tough CVD Grade For steels AC425K CVD Grade For Cast and Ductile Irons 248