1045 Каталог MITSUBISHI 2020 Режущий инструмент Фрезы Резцы Сверла Пластины Стр.K013

Каталог MITSUBISHI 2020 Режущий инструмент для станков Стр. K013 1045 Lab2u

CARBIDE I Slot milling (mm) Work Material Carbon steel, Alloy steel, Mild steel, Copper, Copper alloys AISI 1045, AISI 4140, ASTM A36, AIS11010 Pre-hardened steel, Carbon steel, Alloy steel, Alloy tool steel AISI P21, AISI P20, AISI 4340, SKD, SKT Austenitic stainless steel, Ferritic and Martensltlc stainless steels, Titanium alloy AISI 304, AISI 316, AISI 304LN, AISI 316LN, AISI 410, AISI 430, AISI 431, AISI 420J2, Ti-6AI-4V Dia. DC Cutting Speed (m/min) Revolution (min-1) Feed per Tooth (mm/t.) Feed rate (mm/min) Depth of cut ap Cutting Speed (m/min) Revolution (min-1) Feed per Tooth (mm/t.) Feed rate (mm/min) Depth of cut ap Cutting Speed (m/min) Revolution (min-1) Feed per Tooth (mm/t.) Feed rate (mm/min) Depth of cut ap 10 100 3200 0.04 510 5 80 2500 0.03 300 5 75 2400 0.03 290 5 12 100 2700 0.05 540 6 80 2100 0.04 340 6 75 2000 0.04 320 6 16 100 2000 0.07 560 8 80 1600 0.05 320 8 75 1500 0.06 360 8 20 100 1600 0.07 450 10 80 1300 0.05 260 10 75 1200 0.06 290 10 25 100 1300 0.08 420 12 80 1000 0.05 200 12 75 950 0.06 230 12 Depth of cut Work Material Precipitation hardening stainless steel, Cobalt chromium alloy AISI 630, AISI 631 Heat resistant alloys lnconel718 Dia. DC Cutting Speed (m/min) Revolution (min-1) Feed per Tooth (mm/t.) Feed rate (mm/min) Depth of cut ap Cutting Speed (m/min) Revolution (min-1) Feed per Tooth (mm/t.) Feed rate (mm/min) Depth of cut ap 10 60 1900 0.025 190 5 30 950 0.02 76 2 12 60 1600 0.035 220 6 30 800 0.03 96 2.4 16 60 1200 0.05 240 8 30 600 0.05 120 3.2 20 60 950 0.05 190 10 30 480 0.05 96 4 25 60 760 0.05 150 12 30 380 0.05 76 5 m n 2 Q cc cc l±j a. x u 0 z 1 o 3 o DC Depth of cut DC: Dia. Note 1) For stainless steel, titanium alloy and heat resistant alloy, the use of water-soluble coolant is effective. Note 2) If the depth of cut is shallow, the revolution and feed rate can be increased, Note 3) The irregular helix flute end mill has a large effect on controlling vibration when compared to standard end mills. However, if the rigidity of the machine or the workpiece installation is poor, vibration or abnormal sound can occur. In this case, please reduce the revolution and feed rate proportionately, or set a lower depth of cut, a m K013