851 Каталог MITSUBISHI 2020 Режущий инструмент Фрезы Резцы Сверла Пластины Стр.J229

Каталог MITSUBISHI 2020 Режущий инструмент для станков Стр. J229 0851 Lab2u

CARBIDE (mm) Order Number RE DC BHTA2 APMX LU B2 BD LF DCON No. of Flutes Stock V Q. Effective length for inclined angle 1° 2° 3° VCXBR0400T0300 4 8 3° 14 36 1.8° 100 10 2 2 VCXBR0500T0100L070 5 10 1° 18 70 0.9° 11.76 130 12 2 1 VCXBR0500T0100L100 5 10 1° 18 100 1.8° 12.8 160 16 2 1 100.7 VCXBR0500T0130 5 10 1.5° 18 59 1.1° 130 12 2 2 VCXBR0500T0300 5 10 3° 18 40 1.7° 110 12 2 2 VCXBR0600T0100L070 6 12 1° 22 70 1.8° 13.62 140 16 2 1 70.9 VCXBR0600T0100L100 6 12 1° 22 100 1.2° 14.66 160 16 2 1 100.9 VCXBR0600T0130 6 12 1.5° 22 83 1.5° 15.08 160 16 2 1 VCXBR0600T0300 6 12 3° 22 63 2.1° 140 16 2 2 No interference RECOMMENDED CUTTING CONDITIONS Work Material Alloy steel, Tool steel, Pre-hardened steel AISI H13.AISI W1-10, AISI P21 Hardened steel (45 55HRC) AISI H13 R RE (mm) Taper angle one side BHTA2 Neck length LU (mm) Depth of cut Revolution (min'1) Feed rate (mm/min) ap (mm) ae (mm) R0.5 1" 16 0.02 0.1 22000 530 12000 230 1 21 0.01 1" 26 0.01 1.5° 23 0.02 3" 42 0.05 5" 23 0.05 R1 1 21 0.05 0.2 18000 570 10000 260 1" 31 0.04 1 41 0.03 1.5° 23 0.1 3° 41 0.1 5' 23 0.1 R2 1' 36 0.2 0.8 14000 670 6000 200 1° 46 0.15 1" 60 0.1 1.5" 49 0.2 3° 28 0.2 R3 1° 51 0.3 1.2 10000 840 5000 220 1° 65 0.2 1“ 92 0.1 1.5 53 0.3 3° 34 0.3 R4 1.5’ 55 0.4 1.6 8000 840 4000 270 3° 36 0.4 R5 1° 70 0.4 2 6000 840 3000 310 1 100 0.3 1.5° 59 0.5 3’ 40 0.5 R6 1" 70 0.6 2.4 5000 900 2500 340 1 100 0.4 1.5° 83 0.6 3’ 63 0.6 Depth of cut 3ae ap Note 1) If the depth of cut is shallow, the revolution and feed rate can be increased. Note 2) If the rigidity of the machine or the work materials installation is very low, or chattering and noise are generated, reduce the revolution and feed rate proportionately. J229 ROUGHING BARREL TAPER RADIUS HQa SQUARE