531 Каталог MITSUBISHI 2020 Режущий инструмент Фрезы Резцы Сверла Пластины Стр.F107

Каталог MITSUBISHI 2020 Режущий инструмент для станков Стр. F107 0531 Lab2u

Through Coolant Blade Increased wear resistance due to the use of 2 through coolant ejection holes. 2 through coolant holes supply the coolant to both the rake and flank face, leading to effective cutting edge cooling and increased wear resistance. Additionally this blade can also be used for both low pressure and high pressure coolant (7MPa). Coolant Ports Voice of Developer How is it possible to reduce heat generation The 2 coolant holes used in the blade are capable of using high coolant pressures of up (7MPa), this is achieved by using as large as possible a through coolant hole diameter. The ejection holes are located close to the cutting edge so as to improve the cutting edge cooling effect and increasing wear resistance. 01 You Tube Flexible set up possible with the use of 6 coolant ports. There are 6 coolant ports designed into the tool block. This makes it easier for the end user to set up the tool block and blade to a configuration that suits their needs. If necessary it is also possible to use coolant hose. The ejection type coolant also improves cutting edge cooling and chip evacuation. JV. Voice of Developer Possible to set up to suit the requirements of the workshop environment. One of the objectives of this product is to respond to the customers complaints that “the product did not fit and could not be used". Starting with the coolant outlet that prevents leaks even when oil quantity or overhangs change, everything from the material and the shape of the O-ring, to the length of the hose has been tailored to the effective use in the workshop. F107 GROOVING / CUTTING OFF