431 Каталог MITSUBISHI 2020 Режущий инструмент Фрезы Резцы Сверла Пластины Стр.F007

Каталог MITSUBISHI 2020 Режущий инструмент для станков Стр. F007 0431 Lab2u

VP20RT (1st Recommendation) I RT9010 I PVD coated grade suitable for a wide range of applications. The combination of a special tough cemented carbide substrate with MIRACLE coating provides an excellent balance of wear and fracture resistance. -MIRACLE Coating Tough cemented carbide substrate (90.5HRA) First recommended grade for Titanium alloys. Not recommended for use on non-ferrous alloys. NX2525 9 NX2525, a cermet grade for finish machining of steels and for good surface finishes at lower cutting speeds. VP1ORT (2nd Recommendation) BC8110 A CBN coated grade for continuous cutting, which provides longer life when machining hardened steel. MB8025 IMB8025 is a sintered CBN grade for hardened steel. MY5015 B MY5015 is a CVD coated grade with excellent wear resistance even at high temperatures. It provides longer tool life when machining cast and ductile cast irons. Also suitable for high speed continuous cutting of steels. CVD Coated Carbide Tough cemented carbide substrate BLANK INSERTS Blank inserts for custom grinding RT9010/RT9020 for insert blank First recommendation on insert blank is RT9020 due to the tougher carbide substrate and suitable for a wide range of application. RT9010 is a harder substrate than RT9020 and is ideal for long tool life on stable cutting applications. Coating is recommended for application on steel, stainless steel and cast iron materials. PVD coated grade with a cemented carbide substrate harder than VP20RT. For use on difficult-to-cut materials and for extending tool life. MIRACLE Coating Tough cemented carbide substrate (92.0HRA) Insert blank is not suitable for machining without grinding. F007 GROOVING / CUTTING OFF