392 Каталог MITSUBISHI 2020 Режущий инструмент Фрезы Резцы Сверла Пластины Стр.E012

Каталог MITSUBISHI 2020 Режущий инструмент для станков Стр. E012 0392 Lab2u

BORING BARS E E012 BORING BARS DIMPLE BAR Excellent vibration resistance due to light dimple head. Chip disposal is improved by having two channels for chip evacuation. A laser printed scale on the side for easy installation (Steel shank). I/d is 3 to 5 times the diameter. FSVJB/C VCOOinserts, VBOOinserts KAPR 142° MF LDRED DMIN GAMP: 5 LF Right hand tool holder shown. Finish Finish Light Light FP (11) FM (11) LP (11) LM (n) Medium MV (08,11) Stock Dimensions(mm) Maximum Order Number Insert Number DCON LF LDRED WF H GAMF DMIN fieciirtaStn I/d r R L Ratio Clamp Screw Wrench FSVJC1612R/L-08S VCGT 080200 12 150 26 2 11 5° 16 4 TS202 TKY06F FSVJC2016R/L-08S VCMT 080200 16 180 36 2 15 5° 20 5 TS202 TKY06F FSVJB2520R/L-11S VBMT VBMW 110300 20 200 37.5 2 19 5° 25 5 TS255 TKY08F FSVJB3025R/L-11S VBET VBGW 1103.... 25 250 45 3.5 23.4 5° 30 5 TS255 TKY08F Clamp Torque (N m): TS202=0.6, TS255=1.0 RECOMMENDED CUTTING CONDITIONS Work Material Cutting Breaker Recom- Grade Cutting Speed l/d i 3 (Steel shank) l/d 6 (Carbide shank) l/d = 4 5 (Steel shank) l/d = 7 8 (Carbide shank) Mode mendation (m/min) Feed (mm/rev) Depth of Cut (mm) Feed (mm/rev) Depth of Cut (mm) P Finish FP NX2525 170 (120-220) 0.10 (0.05-0.15) -0.5 0.10 (0.05-0.15) -0.5 Mild Steel 180HB Light LP MP3025 150 (100-200) 0.20(0.10-0.25) -1.0 0.15 (0.05-0.20) -1.0 NX2525 160 (110-210) 0.20(0.10-0.25) -1.0 0.15 (0.05-0.20) -1.0 Medium MP MP3025 140(90-190) 0.25 (0.15-0.35) -2.0 0.20(0.15-0.25) -1.5 NX2525 150 (100-200) 0.25 (0.15-0.35) -2.0 0.20 (0.15-0.25) -1.5 Finish FP MC6015 140(90-190) 0.10 (0.05-0.15) -0.5 0.10 (0.05-0.15) -0.5 NX2525 130 (80-180) 0.10 (0.05-0.15) -0.5 0.10 (0.05-0.15) -0.5 Carbon Steel Alloy Steel 180 350HB Light LP MC6025 140(90-190) 0.20(0.10-0.25) -1.0 0.15 (0.05-0.20) -1.0 MP3025 110 (60-160) 0.20(0.10-0.25) -1.0 0.15 (0.05-0.20) -1.0 Medium MP MC6025 130 (80-180) 0.25 (0.15-0.35) -2.0 0.20 (0.15-0.25) -1.5 MP3025 100 (60-150) 0.25 (0.15-0.35) -2.0 0.20(0.15-0.25) -1.5 M Finish FM VP15TF 150 (110-190) 0.10 (0.05-0.15) -0.5 0.10 (0.05-0.15) -0.5 Stainless Steel 5200HB Light LM MC7025 125 (85-165) 0.20(0.10-0.25) -1.0 0.15 (0.05-0.20) -1.0 VP15TF 130(90-170) 0.20(0.10-0.25) -1.0 0.15 (0.05-0.20) -1.0 Medium MM MC7025 105 (70-135) 0.20(0.15-0.25) -2.0 0.20(0.15-0.25) -1.0 VP15TF 120 (80-160) 0.20(0.15-0.25) -2.0 0.20 (0.15-0.25) -1.0 K Gray Cast Iron Tensile Strength 350MPa Finish F, FS HTilO 130(90-160) 0.15 (0.10-0.20) -0.5 0.15 (0.10-0.20) -0.5 Medium MK MC5015 90 (60-120) 0.20(0.15-0.25) -2.0 0.20(0.15-0.25) -1.5 N Aluminium Alloy Finish F, FS HTilO 300 (200-400) 0.10 (0.05-0.15) -0.5 0.10 (0.05-0.15) -0.5 Flat Top MD220 200 (150-250) 0.10 (0.05-0.15) -2.0 0.10 (0.05-0.15) -1.0 H Hardened Steel 35 65HRC Finish Flat Top MB8120 100 (80-200) 0.10 (0.05-0.15) -0.15 0.10 (0.05-0.15) -0.1 When vibrations occur, reduce cutting speed by 30%. The depth of cut needs to be less than the corner diameter when using the FSVJ type. Note 1) The insert photos are only examples. The letters refer to the chip breaker and the dimension refers to the inscribed circle. Note 2) Dimensions shown for insert corner RE 0.4.(Model of -fr Mark is RE 0.8) Note 3) When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder. VBOO type inserts > A167 A169 : Inventory maintained in Japan. VCOO type inserts >A170-A172 CBN & PCD inserts > B061, B062, B077