The F3M chipbreaker has positive rake angles for smooth cutting, reduced cutting forces and insert wear, leading to dramatically increased tool l

The F3M chipbreaker has positive rake angles for smooth cutting, reduced cutting forces and insert wear, leading to dramatically increased tool life. The machining application area is 0.3-3 mm D.O.C and 0.05-0.3 mm/rev Ap mm 6.5- 6 5.5- 5 4.5- 4 3.5- 3 2.5- 2 1.5- 1 0.5- in F3M F3M 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0.6 0.65 F mm/rev Double-sided insert with chipbreaker for finishing stainless steel Reinforced cutting edge Positive rake angle for smooth cutting and low forces M3M - Chipbreaker for Medium Machining Ap mm 6.5- 6 5.5- 5 4.5- 4 3.5- 3 2.5- 2 1.5- 1 0.5- / a VI if \ fii M3M a - M3M Future Item 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0.6 0.65 F mm/rev Double-sided insert chipbreaker for medium machining of stainless steel with a reinforced cutting edge Positive rake for smooth cutting and reduced cutting forces The machining application range is 0.5-6 mm D.O.C. and 0.15-0.6 mm/rev R3M - Chipbreaker for Rough Machining Ap mm f j- m 14 13 12 11 10 9 8 7 6 5 4 3 2 R3M R3M 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 F mm/rev Double-sided insert for rough machining of stainless steel with a reinforced cutting edge Positive rake angle for smooth cutting and reduced cutting forces The machining application range is 2-11 mm D.O.C. and 0.15-0.7 mm/rev /SCAR HGH LINES F3M - Chipbreaker for Finish Machining