Пластины Mitsubishi из сверхтвердых режущих материалов КНБ и ПКА CBN & PCD TURNING INSERTS

Пластины Mitsubishi из сверхтвердых режущих материалов КНБ и ПКА CBN & PCD TURNING INSERTS

Пластины Mitsubishi из сверхтвердых режущих материалов КНБ и ПКА CBN & PCD TURNING INSERTS _Solid CBN grade for machining cast iron /WOw f "rC and sintered alloys FEATURES Supports high-efficiency machining with large depths of cut. 0Since all Inserts are CBN sintered bodies, there are no limits to the depths of cut as with CBN brazing tools, allowing machining with large depths of cut. For rough machining of cast iron, high-speed, high-efficiency machining, which is a characteristic of CBN tools, can be achieved. Combines wear resistance and fracture resistance 0Use of micro-grain CBN with a newly-developed special binder provides high wear resistance. Use of Mitsubishi's original high-efficiency sintering technology provides high fracture resistance and supports machining with large depths of cut. Addition of insert series equipped with holes Comparison of depth of cut 5mm face turning 0.15 0.10 Surface chatter 0.05 15 30 45 60 75 90 105 120 135 150 165 180 Cutting time (Sec) Workpiece FC250 (DIN GG25) Insert CNGA120408/CNGN120408 Holder Double Clamp Holder Cutting Speed 400 m/min Feed 0.05 mm/rev Depth of Cut 5.0 mm Dry Cutting 5mm external turning MB5015 Poduced to Poduced to order only. FEATURES IMB5015 is exclusive grade for boring of Centrifugal casting Cylinder liners in semi finishing or finishing applications with high with high wear resistance. Рекомендуемые режимы резания при обработке на станке RECOMMENDED CUTTING CONDITIONS Обрабатываемые материалы Work Material Cutting Mode Скорость резания (м/мин) Cutting Speed (m/min) Подача (мм/оборот) Feed (mm/rev) Глубина резания (мм) Depth of Cut (mm) Coolant 100 500 1000 1500 Centrifugal casting Cast Iron Continuous cutting I 'I'll -0.3(Finishing) -0.05(Finishing) Wet I 1 1 1 I 0.8(Semi-finishing) 0,2(Semi-finishing) CUTTING PERFORMANCE VB wear Number of Drilling Workpiece FC200 (Centrifugal casting) 063.0 Cutting Speed 800m/min Feed 0.35mm/rev Depth of Cut: 0.03mm Work: Centrifugal casting Cylinder liner Hole Depth 100mm MB5U15 Mitsubishi Materials 207 CBN & PCD TURNING INSERTS