Концевые фрезы Mitsubishi Materials по металлу SOLID END MILLS

Концевые фрезы Mitsubishi Materials по металлу SOLID END MILLS

Концевые фрезы Mitsubishi Materials по металлу SOLID END MILLS _ TAPER RADIUS BALL SQUARE carbide Концевые фрезы Mitsubishi Materials по металлу SOLID END MILLS _ CRIMgMRB Рекомендуемые режимы резания при обработке на станке RECOMMENDED CUTTING CONDITIONS Work material Copper, Copper alloys Dil DCfynm) Cornei R REM Revdution (mifrl Feed nte (mHi DqMh of cut Depth of ait ie(mm 6 R0.2, R0.3, R0.5 10000 1400 6 0.6 R1 10000 1700 6 0.6 8 R0.3, R0.5 8000 1000 8 0.8 R1 8000 1200 8 0.8 10 R0.3, R0.5 6400 900 10 1.0 R1 6400 1100 10 1.0 12 R0.3, R0.5 5400 800 12 1.0 R1 5400 1000 12 1.0 If the depth of cut Is shallow, the revolution and feed rate can be Increased. The use of water-soluble coolant Is recommended. If the rigidity of the machine or the work materials Installation Is very low, or chattering and noise are generated, reduce the revolution and feed rate proportionately. 1006 Mitsubishi Materials