724 Каталог KYOCERA 2019 Режущий инструмент для металлообработки на станках Стр.K90

Каталог KYOCERA 2019 Режущий инструмент по металлу Стр. K90 0724 Lab2u

ADJUSTABLE SLEEVES FOR DRV / DRZ / DRX ASL/SHE for DRV, DRZ, and DRX Magic Drills Diameter Adjustment / Center Height Adjustment Sleeve Dimensions (Use ASL for inch size drills and SHE for metric size drills) Part Number Stock Unit Dimensions Dia. Adjustment Range Center Height Adjustment Range DCB DCON DF LS L2 L3 L4 ASL 751 00-1 75 inch 0.750 1.000 1.614 1.750 0.157 1.417 0.118 +0.016 -0.008 +0.008 -0.006 100125-212 1.000 1.250 1.929 2.125 0.236 1.496 0.098 +0.016 -0.008 +0.008 -0.006 125150-238 1.250 1.500 2.283 2.375 0.236 1.693 0.098 +0.016 -0.008 +0.008 -0.006 SHE 2025-43 mm 20 25 41 43 4 36 3.0 +0.4 -0.2 +0.2 -0.15 2532-48 25 32 49 48 6 38 2.5 +0.4 -0.2 +0.2 -0.15 3240-53 32 40 58 53 6 43 2.5 +0.4 -0.2 +0.2 -0.15 4050-63 40 50 74 63 6 49 3.0 +0.4 -0.2 +0.3 -0.2 Diameter adjustment range refers to the cutting diameter. ASL and SHE should only be used with the DRV, DRX, or DRZ Magic Drills. They are NOT recommended for the small diameter DRS Magic Drill because the adjustment range is too large. 1. Diameter Adjustment (for Machining Center) Diameter Adjustment e.g.) 030mm Drill p.2mnT +D.4m riJ ASL (in) SHE (mm) Shank Dia. Adjustment Range Shank Dia. Adjustment Range 00.750" +0.016 -0.008 020 +0.4 -0.2 01.000" 025 01.250" 032 - 040 +0.6 -0.2 2. Center Height Adjustment (for Lathe Operations) Center Height Adjustment ASL (in) SHE (mm) Shank Dia. Adjustment Range Shank Dia. Adjustment Range 00.750" +0.008 -0.006 020 +0.2 -0.15 01.000" 025 01.250" 032 - 040 +0.3 -0.2 COREMASTER COREDRILL STINGER DRILL COUNTERBORE COUNTERSINK How to Use the Adjustable Sleeve 1. Hole Diameter Adjustment when Drilling (1) Adjust the scale at the flange periphery of the sleeve to the center of the drill coolant plug. (Fig.1) (2) When making the hole diameter larger, rotate the sleeve in (+) direction and to make it smaller, rotate the sleeve in (-) direction (3) When rotating the sleeve, insert the wrench supplied with the drill into the hole on the flange periphery to rotate the sleeve. (4) Using the bottom screw of the side-lock arbor, firmly tighten on the drill directly through the sleeve's window. The upper screw should be tightened slightly so that the sleeve will not be damaged. Scale for Milling Machines Bottom Screw (Tighten Firmly) Upper Screw (Tighten Slightly) Caution: Not applicable with Collet Chuck type Arbor. Scale on the sleeve is the reference value. Check the actual hole diameter after adjusting. 2. Center-Height Adjustment for Lathes Most Lathe problems occur due to Center Height Deviation. The Center Height is appropriate if a core approximately 0.5mm diameter remains at the center of the end face. (Fig.3) Center-height adjustment is necessary if: : No core remains or Core diameter is more than 1 mm DRV (DRX) DRZ Fig.1 (DRZ) (Example of Adjusting the Hole Dia. +0.4mm) Fig.2 (DRZ) Fig.4 (1) Align the drill with the outer insert face parallel to the X-axis of the tool turret. (Fig.4) (2) Align the scale (for the lathe) on the flange face of the sleeve to the center of the drill coolant plug. (3) When no core remains, rotate the sleeve to (+) direction to make the core larger, and when the core diameter is more than 1mm, Fig.3 rotate the sleeve to (-) direction to make the core smaller. (4) When rotating the sleeve, insert the wrench supplied with the drill into the hole on the flange periphery to rotate the sleeve. (5) After Completing the adjustment, firmly tighten on the drill directly through the sleeve's window. Note: Depending on amount of the center height adjustment, the hole diameter may change. It is recommended that the hole diameter is checked after the center height adjustment. K90 Kyocera (Customer Service) - Option 1 (Technical Support) - Option 2 Visit us online at : Standard Item A : Phaseout Item (will be removed from next catalog) Contact your local Kyocera sales engineer to upgrade old products to new technology