188 Каталог KYOCERA 2019 Режущий инструмент для металлообработки на станках Стр.D2

Каталог KYOCERA 2019 Режущий инструмент по металлу Стр. D2 0188 Lab2u

TURNING HOLDERS COOLANT THROUGH HOLDERS Double-Clamp-JCT Coolant-Through Turning Holders Discharges coolant in three directions to improve chip control and lengthen tool life for a wide variety of workpieces including steel, hardened material and difficult-to-cut material Superior Chip Control Performance Special coolant-through structure designed by careful simulation and analysis technology O : Coolant Hole Double-Clamp Firm insert clamp and easy to use in single operations High-density coolant supply close to the cutting edge Unique Nozzle Shape Provides coolant to a wide area of the insert surface Advantages of Internal Coolant Discharges coolant in three directions and the cutting edge stays cool Discharges Coolant towards the Cutting Edge Internal Coolant Provides Longer Tool Life and Excellent Chip Control Extended Tool Life Wear Resistance Comparison (Internal Evaluation) Internal Coolant (1,015 psi) External Coolant (58 psi) Cutting Conditions: Vc = 820 sfm, f = 0.079 ipr, D.O.C. = 0.079", Wet CNMG432 Insert Workpiece: 4137 External Turning After Machining 42.2 min Improved Chip Control Chip Control Comparison (Internal Evaluation) Internal Coolant (1,015 psi) External Coolant (58 psi) Cutting Conditions: Vc = 660 sfm, f = 0.002 ipr, D.O.C. = 0.020", Wet DNMG432 Insert Workpiece: 4131 External Turning D2 Kyocera Visit us online at