184 Каталог KYOCERA 2019 Режущий инструмент для металлообработки на станках Стр.C32

Каталог KYOCERA 2019 Режущий инструмент по металлу Стр. C32 0184 Lab2u

PCD INSERTS Grooving 1 -Edge How to read this page B15 CBN All PCD Items Insert Sharp Edge ANSI Part Number Non-Ferrous Metals (with Interruption) Non-Ferrous Metals (without Interruption) Titanium Alloys (with Interruption) Titanium Alloys (without Interruption) CWauo (in) Dimensions (mm) CW CDX RE W1 S1 D1 LE PSIR% Turning Grooving Zb7 0 A A External Grooving (Turning is Possible) TKF12r/l 200-AS i PSIRR CDX f I TKF167l 250-AS TKF12r/l 150-NB 0.059 200-NB 250-NB 0.079 0.098 2.0 2.5 4.0 4.0 3.0 3.0 250-NB4.5 0.098 Lead angle (front cutting edge angle: PSIRr/l) shows the angle when installed into tooIholder TKF PCD inserts are only for turning and grooving Cut-off is not recommended. Dimension CDX shows available grooving depth Insert Identification System Applicable Range TKF12-AS TKF16-AS f (ipr) E12 f (ipr) TKF PCD inserts are only for turning and grooving Cut-off is not recommended Note) 1. The cutting edge of the TKF-AS will be 0.04" lower than the center line when attached to the KTKF too Ih older (Ref. Fig.1). Adjust the height by making NC lathe parameter settings or inserting a plate. 2. If the 0.04" adjustment is not possible on your automatic lathe, use the TKF-NB (Ref. Fig.2). KTKF Too Iholder Fig.1 When a TKF-AS/-ASR insert is attached (The cutting edge is 0.04” lower than the center line.) KTKFTnnlhnlrler g.2 When a TKF-NB insert is attached C32 Kyocera CBN & PCD Inserts sold in 1 piece boxes. : Standard Item A : Phaseout Item (will be removed from next catalog) Contact your local Kyocera sales engineer to upgrade old products to new technology