572 Каталог KYOCERA 2016 Металлорежущий инструмент для токарной обработки на станках Стр.J46

Каталог KYOCERA 2016 Токарные резцы с пластинами Стр. J46 0572 ENG Lab2u

THREADING APPLICABLE TOOLHOLDERS & INSERTS The standard specification of the inch size thread is based on the dimension of 1/8' In Applicable Toolholders and Inserts Lists on J34 J37, Right-hand Insert / Right-hand Toolholder descriptions are listed based on the previous TNN type inserts. For other applicable inserts / toolholders or stock availability of Left-hand, see each relevant page and J40. Parallel Pipe G (PF), Rp (PS) Nominal Thread TPI External Thread (G) Internal Thread (G,Rp) Root Radius Ext./Int. (mm) Inch Symbol (Previous Symbol) Toolholder Insert Toolholder Insert Min. Bore Dia.(mm) Partial Profile Full Profile Partial Profile Full Profile G 1/16 ( - ) 28 KTNROOOOD-16 KTNSROOOOD-16 16ERA55-TF 16ERAG55-TF 16ERA55 16ERAG55 - SINR0612S-06E (EZT J28) (HPT J32) 06IR5501 6.56 0.12 '1/8 G 1/8 (PF 1/8) 8.57 '2/8 G 1/4 (PF 1/4) 19 KTNROOOOD-16 KTNSROOOOD-16 16ERA55-TF 16ERAG55-TF 16ERA55 16ERAG55 16ER19W-TF 16ER19W SINR0816S-08E (EZT J28) (HPT J32) 08IR5501 11.45 0.18 '3/8 G 3/8 (PF 3/8) SINR1216S-11E (EZT J28) (HPT J32) 11IRA55 11IR55005 14.95 '4/8 G 1/2 (PF 1/2) 14 KTNROOOOD-16 KTNSROOOOD-16 16ERAG55-TF 16ERG55-TF 16ERAG55 16ERG55 16ER14W-TF 16ER14W SINR1516S-11 11IR55005 18.63 0.25 SINR1616S-16 16IRAG55 16IRG55 16IR5501 16IR5502 16IR14W-TF 16IR14W '5/8 G 5/8 (PF 5/8) SINR2016S-16 20.59 '6/8 G 3/4 (PF 3/4) 24.12 '7/8 G 7/8 (PF 7/8) SINR2420S-16 27.88 '8/8 G 1 (PF 1) 11 KTNROOOOD-16 KTNSROOOOD-16 16ERAG55-TF 16ERG55-TF 16ERAG55 16ERG55 16ER11W-TF 16ER11W SINR2420S-16 16IRAG55 16IRG55 16IR5501 16IR5502 16IR11W-TF 16IR11W 30.29 0.32 '9/8 G 1 1/8 (PF 1 1/8) CINR3025S-16 34.94 '10/8 G 1 1/4 (PF 1 1/4) CINR3732S-16 38.95 Hereafter, all the threads are 11 TPI and the root radius 0.32. The same tool for G 1 1/4 is recommended. Tapered Pipe R, Rc(PT), (BSPT) Nominal Thread TPI External Thread (G) Internal Thread (Rc) Root Radius Ext./Int. (mm) Inch Symbol (Previous Symbol) Toolholder Insert Toolholder Insert Partial Profile Full Profile Partial Profile Full Profile R 1/16, Rc 1/16 ( - ) 28 KTNROOOOD-16 KTNSROOOOD-16 (16ERA55-TF) (16ERAG55-TF) (16ERA55) (16ERAG55) 16ER28BSPT-TF 16ER28BSPT SINR0612S-06E (EZT J28) (HPT (& J32) 06IR5501 - 0.12 '1/8 R 1/8, Rc 1/8 (PT 1/8) 28 '2/8 R 1/4, Rc 1/4 (PT 1/4) 19 KTNROOOOD-16 KTNSROOOOD-16 (16ERA55-TF) (16ERAG55-TF) (16ERA55) (16ERAG55) 16ER19BSPT-TF 16ER19BSPT SINR0816S-08E (EZT J28) (HPT J32) 08IR5501 - 0.18 '3/8 R 3/8, Rc 3/8 (PT 3/8) 19 SINR1216S-11E (EZT J28) (HPT J32) (11IRA55) (11IR55005) 11IR19BSPT-TF 11IR19BSPT '4/8 R 1/2, Rc 1/2 (PT 1/2) 14 KTNROOOOD-16 KTNSROOOOD-16 (16ERAG55-TF) (16ERG55-TF) (16ERAG55) (16ERG55) 16ER14BSPT-TF 16ER14BSPT SINR1516S-11 (11IR55005) 11IR14BSPT-TF 11IR14BSPT 0.25 SINR1616S-16 (16IRAG55) (16IRG55) (16IR5501) (16IR5502) 16IR14BSPT-TF 16IR14BSPT '6/8 R 3/4, Rc 3/4 (PT 3/4) 14 SINR2016S-16 '8/8 R 1, Rc 1 (PT 1) 11 KTNROOOOD-16 KTNSROOOOD-16 (16ERAG55-TF) (16ERG55-TF) (16ERAG55) (16ERG55) 16ER11BSPT-TF 16ER11BSPT SINR2420S-16 (16IRAG55) (16IRG55) (16IR5501) (16IR5502) 16IR11BSPT-TF 16IR11BSPT 0.32 '10/8 R 1 1/4, Rc 1 1/4 (PT 1 1/4) CINR3025S-16 '12/8 R 1 1/2, Rc 1/2 (PT 1/2) CINR3732S-16 Hereafter, all the threads are 11 TPI and the root’s radius 0.32. The same tool for G 1 1/2 is recommended. Hereafter, all the threads are 11 TPI and the root radius 0.32. The same tool for G 1 1/4 is recommended. 1) The largest toolholder available for the minimum bore dia. is recommended for the female threading in these tables. Then, the toolholder whose min. bore dia. is smaller than the recommended toolholder can be used for threading 2) When using "Partial Profile" for Tapered Pipe threading, thread's corners become sharp edged, and the shape will not be the same as the standard shape for Tapered Pipe. J46 Kyocera