513 Каталог KYOCERA 2016 Металлорежущий инструмент для токарной обработки на станках Стр.H21

Каталог KYOCERA 2016 Токарные резцы с пластинами Стр. H21 0513 ENG Lab2u

KGD RECOMMENDED CUTTING CONDITIONS Recommended Cutting Conditions (PM / PH Chipbreakers) Recommended Insert Grade (Vc sfm) Feed Rate (ipr) Workpiece Material PM PH MEGACOAT NANO MEGACOAT Edge Width Edge Width c0 E 0 GC PR1535 PR1225 PR1215 0.079" 0.158" (2mm 4mm) 0.079" (2 mm) 0.095" 0.158" (3mm 4mm) Carbon Steel 260-660 260-660 330-660 0.0031-0.0071 0.0039-0.0098 0.0059-0.0110 Alloy Steel 230-590 230-590 260-590 "S Stainless Steel 200-490 200-490 200-490 0.0024-0.0047 0.0020-0.0047 0.0031-0.0059 Cast Iron 330-660 0.0031-0.0071 0.0039-0.0098 0.0059-0.0110 1 st Recommendation 2nd Recommendation 4 Feed Examples PM Chipbreaker (Workpiece Material: 1049) 0.004 0.008 0.012 Feed Rate (ipr) PH Chipbreaker (Workpiece Material: 1049) - 0.004 0.008 0.012 Feed Rate (ipr) Indicates the center value of feed (f) CAUTION During Cut-Off 1) Flood coolant is recommended. Apply enough coolant to the cutting edge 2) Keep spindle revolution constant during processing to achieve longer tool life 3) Cut off as close to the chuck as possible 4) Reduce feed rate by 30-50% when diameter is same as cut-off insert width to prevent impact £ 0.095” -0.158’ CD 0.079” 0.079” S -0.158” T3 Kyocera H21 GRADES INSERTS CBN & PCD TOOLHOLDERS SMALL TOOLS BORING GROOVING CUT-OFF THREADING HSK TOOLING SPARE PARTS TECHNICAL INDEX