215 Каталог KYOCERA 2016 Металлорежущий инструмент для токарной обработки на станках Стр.E11

Каталог KYOCERA 2016 Токарные резцы с пластинами Стр. E11 0215 ENG Lab2u

SMALL TOOLS IDENTIFICATION SYSTEM Square Shank Identification System A: Back Clamp C Top Clamp P Level Lock S Screw Clamp C: 80° Rhombic D: 55° Rhombic S 90° Square T 60° Triangle V 35° Rhombic R Right-Hand L: Left-Hand N Neutral Indicates the holder cross section. For square shanks this number will represent the number of sixteenths of width and height. (Ex. 6/16 = 3/8" Square) Number of 1/8ths on 1/4" I.C. and over. Optional Code Optional Mark or Number (FF Without Offset) Clamping System Insert Shape Hand of Tool Shank Size Insert Size I.C. Others ANSI (inch) ISO (metric) S C L C R S C C R 6 - 2 JX 12 12 JX FF 09 FF Cutting Edge Angle Insert Relief Angle Shank Height Shank Width Toolholder Length 90° 93° 45‘ 75° 45‘ Vs v\ 63“ 90“ B 5° Positive C 7° Positive N 0° Negative P 11 ° Positive Shank Height (mm) Shank Width (mm) Insert Size Some back turning toolholders have Kyocera's unique descriptions External Sleeve Holder Identification System Steel ANSI (in) ISO (mm) ANSI (in) ISO (mm) F: 3.00 80 Q: 7.00 180 G: 3.50 90 R: 8.00 200 H: 4.00 100 S: 10.00 250 J: 4.50 110 T: 12.00 300 K: 5.00 125 U: 14.00 350 L: 5.50 140 V: 16.00 400 M: 6.00 150 W: 18.00 450 N: 6.50 160 Y: 20.00 500 P: 6.75 170 X: Special S Screw Clamp C: 80° Rhombic D: 55° Rhombic V 35° Rhombic L: Left-Hand Shank Toolholder Length Clamping System Insert Shape Hand of Tool ANSI (inch) ISO (metric) s 19 K s 20 K S C L C L 09 S C L C L 09 B H N Shank Diameter ANSI A two-digit number that indicates the shank diameter in 1/16" increments. ISO Shank diameter in mm Cutting Edge Angle L u aEL k'95° 9li -< < Insert Relief Angle The dimensions and specifications are subject to change for improvement without notice. Depending on the machine specifications such as attachment Dimensions, the symbol may not match the actual toolholder length. Insert Size (mm) Kyocera E11