160 Каталог KYOCERA 2016 Металлорежущий инструмент для токарной обработки на станках Стр.C32

Каталог KYOCERA 2016 Токарные резцы с пластинами Стр. C32 0160 ENG Lab2u

PCD TOOLS Grooving 1 -Edge How to read this page B13 CBN 0 Za7 0 A 7 A All PCD Items Insert Sharp Edge ANSI Part Number yyio.ooi2 (in) Non-Ferrous Metals (with Interruption) Non-Ferrous Metals (without Interruption) Titanium Alloys (with Interruption) Titanium Alloys (without Interruption) Dimensions (mm) Wi0-03 (mm) re T H hi 0d Angle (°) Turning Grooving TKF127l 200-AS 250-AS TKF16r/l 250-AS Turning Grooving TKF12r/l 200-ASR 250-ASR Left-hand insert shown with right-hand PCD edge External Grooving (Turning is Possible) isF TKF16r/l 250-ASR TKF12r/l 150-NB 0.059 200-NB 250-NB 0.079 0.098 2.0 2.5 4.0 4.0 250-NB4.5 0.098 E12 8.3 8.3 3.0 3.0 Lead angle (front cutting edge angle: 0) shows the angle when installed into toolholder TKF PCD inserts are only for turning and grooving Cut-off is not recommended. Dimension B shows available grooving depth Insert Identification System TKF TKF 12 12 R L 200 200 AS AS Applicable Range TKF12-AS/-ASR TKF16-AS/-ASR Insert Type Width (Edge Width) Insert Hand Name of Chipbreaker R Right-hand AS AS Chipbreaker L: Left-hand NB Without Chipbreaker PCD Insert Hand Without Indication: The edge hand is the same as the insert hand. R: Right-hand f Opr) TKF PCD inserts are only for turning and grooving Cut-off is not recommended f (ipr) Note) 1. The cutting edge of the TKF-AS/-ASR will be 0.04" lower than the center line when attached to the KTKF toolholder (Ref. Fig.1). Adjust the height by making NC lathe parameter settings or inserting a plate. 2. If the 0.04" adjustment is not possible on your automatic lathe, use the TKF-NB (Ref. Fig.2). KTKF Toolholder t Fig.1 When a TKF-AS/-ASR insert is attached (The cutting edge is 0.04” lower than the center line.) KTKF Toolholder 4 '"7 i HI Fig.2 When a TKF-NB insert is attached C32 Kyocera CBN & PCD Inserts sold in 1 piece boxes. U.S. Stock U.S. Stock (R-hand Only) 0 U.S. Stock (L-hand Only) O World Express World Express (R-hand Only) World Express (L-hand Only)